Altium Designer 6.9 (Learn one)

1, A project can have a number of separate schematic diagram.  

2, A number of separate schematic diagram of the project can not be separately imported into different PCB, import a PCB when the same

Project all schematic must be a collective, and will certainly be in the same time to import this PCB, that is, a PCB must contain all the schematic diagram of this project. But you can draw more than one PCB.  

3, when the schematic number or circuit changes, re-import PCB , the PCB will be updated to the same with the schematic diagram,

When the schematic is updated when the PCB has changed the bit number, the changed bit number is displayed next to the schematic's existing bit number in the schematic diagram. But do not change the existing bit number.  

4, multiple separate schematic import to the PCB power supply is connected.  

5, multiple discrete schematic diagram for signal connection, you need to establish a hierarchical schematic, otherwise imported intoPCBboards are not connected. 6, Default Settings-TOOL---Preferences---defauts 7, holdCtrl+shiftRolling mouse wheel switch layer8, Check HoldSHIFTdrag the symbol again to copy function9, Select a component,Ctrl+rContinuous placement,Ctrl+dequivalentCtrl + Cand theCtrl + Vcopy and paste,

or press E again on the component, Select it, hold down Ctrl and drag the symbol to DRAG function, i.e. the link wire will follow the extension, with the MOVE

Can be moved differently, pressMKey appearsDRAGand theMOVE,DRAGcan be conveniently two chip pin corresponding connection, and then drag, to avoid a single cable connected One,EDIT----- Break Wiredisconnection A,Place ---DIRECTIVE---NO ERCdo not proceedERCElectrical Rules Check -,Place ---DIRECTIVE---compile maskcompiling the shielding cover -, schematic compilation:Project---Compile document sheet, schematic label ordering:Tools---annotate Schematics, schematic and the next corner of the template to add,Design-Template-Set template file nameOpen the Self-brought module

Board Path foundTemplatesfolder into open, change template contentDesign-Document Options-ParametersChangeValuecan be -,ctrl+fFind -,ctrl+hFind and replace +, The hierarchy diagram is drawn from the top level to the child layer, drawing the top layer first, and then clicking a schematic modulesymbolRight-click

Select sheet symbol actions---create sheet from  symbol  Create sub-schematic. Hierarchy schematic port input/output corresponding check design - synchronize sheet entries and ports  sync check  20   hierarchical schematic diagram has sub-layer to the top layer, new project open sub-layer schematic, and then create a new schematic open,

Right-click on the sheet actions---Create sheet symbol from sheet or HDL , open the Options box, clicking a sub-schematic to generate a symbol , generate in turn, then resize and pin, but not change the input and output direction, and then connect.  

1, view the child layer from the top level, click the up and down arrow button, and then tap aSYMBOLcan enter thisSYMBOLSub-schematic view of the image. The lower left corner has edit and view interface toggle. 1, pin Sequence number increment decrement operation2, pin hide, and function settings3, Low -pin low-signal compliance settings4, Data Link design and view of components 

5. How to make the elements in the schematic updated after the change of the pants element

6 , schematic elements directly set up data link

7. Multi-pin chip Division drawing library Element

Altium Designer 6.9 (Learn one)