Altium Designer uses the wizard to paint the package library
The methods have been summed up very well by the predecessors. Cite the results of the predecessors, in case the time is long forgotten. First of all, I would appreciate the work of our predecessors. For example, Altium designer6.9 draws a BTS7960 package. First, open Altiumdesigner, first build a package library file. Then select TOOLS--IPC Footprintwizard in the toolbar Enter the IPC Wizard. Click Next
Package size diagram of the device in mm:
Back in the wizard, select the encapsulation style. After selecting a style, you will see the outline of the package from the diagram on the right, and then, for example, xs128 can choose PQFP package style.
Next, control the software in the schematic callout and datasheet in the size map, carefully fill in each data, unit mm
Next, like this fill there are many pages, some of the system automatically generated data, can be modified selectively, have a schematic, a look can understand
In this step, fill in the name and description:
This step, choose to save to the current file, the default is OK.
Finally, point to finish. Complete.
Final effect Diagram
You can import this package into a PCB file and print it to a white paper to see the effect.
TheEND
|
|
|