Canon MP288 Qing 0 software use

1th Step: First let the printer into the maintenance mode

The way to enter the maintenance mode is:

1, to ensure that the printer power switch is off, first press the "Cancel/Stop" button, and then press the "Power switch" button. (Do not release two buttons.) )

2, when the power supply light light green, do not release the "Power Switch" button, release the "Cancel/Stop" button, and then press the "Cancel/stop" key 5 times, and then release the "Power Switch" "Cancel/Stop" key. (Every time the "Cancel/Stop" button, the warning light and the power supply light alternately flashing.) )

3. When the power LED is green, the printer is ready for maintenance mode operation.

Prompt before operation:

1, to ensure that the printer to clear the driver has been installed, the printer's power cord and data cable has been connected well.

2. Only 1 printers are received at zero.

3, the above prompts the printer to enter the maintenance mode method refers to the "Cancel/Stop" key and "Resume/cancel key" is the same key, "on" and "power switch" key is the same key.

2nd Step:

After the implementation of the first step, you can open the 0 software, double-click the 0 Software icon to open the software. Then select the port, here to be particularly prompted, if your computer is connected to more than two printers, it is recommended that you implement the waste ink clear 0 before unplugging other printer data cable, so that the software will automatically connect to the only one port, and you do not have to choose the port to be puzzled.

3rd Step:

Click on the 2 buttons that are circled in the software below

1, in the 0 software button, when the selected function runs, the Qing 0 software becomes dim, inactive.

2, when completes the operation, will display "This function has completed" the prompt. (The software is in English prompts this function has been completed)

3, if the printer does not enter the maintenance mode, point software will show "wrong!" Or the software is dim and inactive.

(If the printer does not enter the maintenance mode, please follow the above to enter the maintenance mode step more than several times to enter the.) )

The 4th step: after 0 successful, re-opened your printer to clear zero completes.

(if no 0 success, please follow the steps again)