HP Server install win x64 operating system

Server: HP Server

Operating system: Windows Server R2

Task: Install the WIN8 system on the HP server

Tools: U disk, Cn_windows_server_2008_r2.iso

Operation Steps:

1. the Self-test screen is pressed F10 Intelligent Provisioning

2. go to the IP boot interface and select "Configure and Install"

3. hardware settings, according to the actual settings

4. Operating System Selection--installation method, custom installation-->u disk--double-click mirror image File--Select operating system version, partition, etc.

5. Follow the steps to navigate one step at a

There are two things to keep in mind during the entire operation:

1) allow the server to retrieve your external device, such as a USB flash drive or removable hard disk, it is recommended to remove the new name of the USB flash drive, for example, the name of the USB stick is the old Peaches U disk , This situation is not retrieved USB flash drive;

2) Server Select the full version of the enterprise 64-bit installation;

3) partition, under the horizontal transverse sliding to determine the size of the system disk partition, or the entire hard disk has only one partition, after the partition installed system, the remaining partition.

Summary: Different brands of servers in the boot and installation process a little bit different, it is recommended to install more than the installation manual, the conditions can be more experiments, installation process to pay attention to details, to avoid losing data and repeated installation, encountered problems, more access to information, and more contact with after-sales service providers.

This article is from the "sky9890" blog, make sure to keep this source http://sky9896.blog.51cto.com/2330653/1855127

HP Server install win x64 operating system