IPv6 DNS UDP. bat

There is a situation is that my QQ can continue to log in and can upload information, but my web page is not open, this is due to the use of QQ IP to the transmission of information between IP, the use of the UDP protocol, instead of similar to the login network address, the use of the domain name is converted to an IP address, DNS resolution is required to transfer addresses for IP addresses, so DNS cannot be set incorrectly. For example, the DNS I need to set up here is: 222.200.160.1 and 222.200.160.2

In addition, for IPv6, it can use tunneling technology, double plank technology or gateway conversion technology (see article http://www.net130.com/netbass/netmanger/20040310018.htm and HTTP/ www.kame.net/http://www.cernet2.edu.cn/isatap.php); Therefore, if you display the ipconfig after 2001: Also can be on the IPv6. In addition, for the ping extranet you can see if your access is correct, similar to the ipv6.google.com.cn form. Also, you can ping the default gateway to confirm that it can be a LAN host. Of course, the current IPv6 is only for the education network to open.

In addition, you can use the. bat file to view which IPs within the LAN are already in use and can view: Bat can be edited and will be opened directly using Notepad, it is worth pointing out that it is essentially a DOS command (can be joined ttp://www.jb51.net/article/5828.htm)

Also, it is best not to have wired and wireless networks open at the same time, because they are different NICs. If it is wireless Internet access can not be shared.

This article is from the "Cloud Light Breeze" blog, please be sure to keep this source http://htlbydgod.blog.51cto.com/9829379/1620246

IPv6 DNS UDP. bat