Juniper-ha SSG Series Cluster-id solutions to scarcity problems

Juniper-ha SSG Series Cluster-id solutions to scarcity problems.

Http://forums.juniper.net/t5/ScreenOS-Firewalls-NOT-SRX/Cluster-ID-issue-on-ssg140/m-p/15312//true

(Answer from Juniper's official technician)

By default, NSRP would support up to 8 cluster ID ' s and 8 VSD ' s. As noted in the previous entry, you can increase this with the Envar, but you need to use them in multiples of 8, and the  combination of cluster ID ' s and VSD ' s cannot exceed . You'll need minimum ScreenOS 6.1 to doing this.

For example, you can increase the number of cluster ID's to, and number of VSD's to, using the Envar commands:

Set Envar nsrp-max-cluster=16

Set Envar nsrp-max-vsd=16

After the, you need to reboot.

The above is the official answer, simply speaking, cluster ID and Vsd-group ID can be increased to a maximum of 64 need ScreenOS 6.1 or more support. After you have configured the above command, restart the machine.

Current company: SSG140 support ssg140-> set Envar nsrp-max-cluster=32

Ssg140-> Set Envar nsrp-max-vsd=16

This article from "Allen on the road-from zero to one" blog, reprint please contact the author!

Juniper-ha SSG Series Cluster-id solutions to scarcity problems