To the users of Photoshop software for detailed analysis to share a little purple dark cyan photo effect of the tutorial.
1, open the original material large image, create hue/saturation adjustment layer, reduce yellow, green saturation, parameters and effects of the following figure.
2, press CTRL + J to copy the current hue/saturation adjustment layer, the effect of the following figure.
3, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, then create the curve adjustment layer, the RGB, red, green, blue channel adjustment, parameters and effects as shown below. This step darkens the dark part of the picture and increases the cool color.
4, press CTRL + J to adjust the current curve layer copy layer, the effect of the following figure.
5, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 8,9, determined to press CTRL + ALT + G to create a clipping mask, the effect is as shown in Figure 10. This step is mainly to increase the dark part of the picture blue-red.
6, create a new layer, press the letter key "D" before, the background color reverts to the default black and white, then selects the menu: Filter > Render > Cloud, and determines the blending mode to "filter"; alt-click to add a layer mask, and use a soft white brush with less transparency to paint the top area of the middle of the picture. The following figure.
7. Press CTRL + J to copy the current layer, fill the mask with black, and then use the soft side white brush to paint the lower part of the picture below, as shown below.
8, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 13,14, after the mask filled with black, and then with the lower transparency of the soft edge white brush to wipe out the middle area, as shown in Figure 15. This step adds a light cyan to the Middle high light area.
9. Create a new layer, use the elliptical marquee tool to pull out the selection shown in the following figure, feather 45 pixels and fill the dark cyan: #6B8691, remove the selection and change the blending mode to "color filter", and the effect is as follows. This step adds a light cyan to the top area.
10, the background layer to copy a layer, press CTRL + Shift +] top, with the pen tool to pull out the characters, into the selection after adding layer mask, the following figure.
11, create curve adjustment layer, the RGB channel down a bit, parameter settings such as Figure 18, determine after the creation of a clipping mask, and then the mask filled with black, and then use the soft side of the white brush to the bottom of the area painted darker, the effect is as shown in Figure 19.
12, create hue/saturation adjustment layer, the appropriate reduction of the degree of clarity, parameter settings, such as Figure 20, after the creation of a clipping mask, and then the mask to fill the black, and then with the lower transparency of the soft edge white brush the character backlight area, such as Figure 21.
13, the same method of the character backlight area to deepen a little, the effect of the following figure.
14, create hue/saturation adjustment layer, reduce the whole picture and red saturation, parameter settings such as Figure 23,24, after the creation of a clipping mask, the effect is shown in Figure 25.
15, create an optional color adjustment layer, the red, white to adjust, parameter settings such as Figure 26,27, after the creation of a clipping mask, the effect is shown in Figure 28. This step is to fine-tune the character's complexion.
16, create brightness/Contrast adjustment layer, the appropriate increase in brightness and contrast, parameter settings such as Figure 29, to determine the mask filled with black, and then with the lower transparency of the soft edge of the white brush to the left side of the light on the area, the effect is as figure 30.
17, create a new layer, with the elliptical marquee tool pull out the selection shown in the following figure, feather 30 pixels after the lavender: #C5BBC3, remove the selection after the blending mode to "color", the effect of the following figure. This step adds a high light to the picture.
18, create hue/saturation adjustment layer, reduce the entire figure lightness, parameter settings, such as Figure 32, after the mask filled with black, and then with a soft white brush to the bottom of the picture and the left part of the painting darker, the effect is as Figure 33. This step adds a dark angle to the picture.
19, create a new layer, press CTRL + ALT + Shift + E-stamped layer, then select menu: Filter > Blur > Motion blur, Angle set to 45 degrees, distance set to 150, after the blending mode to "soft light", opacity to: 30%, the effect of the following figure.
20, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, then create the curve adjustment layer, the RGB, blue channel adjustment, parameters and effects as shown below. This step darkens the dark part of the picture slightly.
Finally, rub the skin of the character, strengthen the local light and finish the final effect.
Well, the above information is small compiled to you photoshop this software users brought to the details of a little purple dark cyan photo effect of the tutorial to share the full content of the whole, you see the users here are now very how to color the bar, Then you go to follow the small part of the tutorial to share their own color test.
