To give you Photoshop software users to detailed analysis to share a nostalgic film photo effect of the production tutorial.
2. Create old film effect
In Photoshop, open the material provided in the tutorial, then select the Cutting tool, as shown in the following figure, cut the bridge part, so that the modern vehicle and bridge separation.
Open the following two texture pictures, you can also find similar.
In the Pack_2_film_07.jpg file, select Choose > Select All, then edit > copy, switch to the bridge, and paste the picture above the bridge layer.
Change the film layer blending mode to multiply, select Edit > Free transform, let the film size and bridge layer of just cover, and then enter confirm operation.
For the second film material the same operation. Note that when you resize the film, the holes are aligned exactly, and if the two-film overlay is too strong, you can reduce the opacity of the layer.
The second texture effect is a bit too strong in the center of the picture to add a mask to the second film layer and select layer. Layer Mask > Show all, then select the black soft brush to remove the texture from the center of the picture.
For old photos, the quality of the bridge material seems to be a bit out of time. Select the bridge layer, select Layers > Smart objects > Convert to Smart Objects, and then select Filter > Blur > Gaussian blur to set a radius of 2 pixels.
Use the Polygon Lasso tool to select the approximate outline of the background layer, and then click the Add Layer Mask button on the layers panel to use the layer mask.
Select the Brush tool, set the hardness is lower, and then along the edge of the background in the mask painted, the edge gradually exposed, as if the effect of fading.
Now the picture seems to be "old" enough to benefit from the beautiful texture effect.
3. Further deepening of the effect
For film special effects, do the above effect has been very good. But the real old photos are usually a bit discolored, and there are some slight leaky from the photographic techniques of the time. If you want the effect to go further you, then the following operation.
Add a photo filter adjustment layer to the background layer, set the filter color to brown and density to 54%, which gives the photo an antique hue.
Consider old photos will be a bit faded, the overall tone will be a little white. To simulate this effect, you need to add a curve adjustment layer, as shown in the following illustration, to pull the curve up.
Add a new texture effect, add a new layer, set the foreground color to black, the background color to a light yellow #ece88c, and then select Filter > Render > Cloud.
Select Filter > Noise > Add noise, set the number to 50%, and then select Filter > Blur > Gaussian blur to set the radius to 6.4 pixels, then the blending mode is superimposed and opacity is 60%.
Leaky is a common flaw in old photos that can be simulated with a color gradient. Create a new layer, select the gradient tool, and in the Gradient dialog box, set the following figure.
The linear gradient starts at the top left corner, ends at the bottom of the right, and tilts slightly downward, as shown in the following illustration.
When you are finished, change the layer blending mode to soft light.
Add a layer mask to the leaky layer, then select the Gradient tool, set the linear gradient, the color is black to white, the gradient direction, from the bottom of the photo to the top gradually become white. Make the gradient appear as if it were starting at the bottom.
In order for the picture effect to be limited to the photo range, you need to clip the layer. Select all layers in the layer panel, and then clip all of the background layers.
All right, the above information is the full content of the detailed nostalgic film photo effect production tutorial that the users of Photoshop will bring to you. You see the users of Photoshop software here, I believe you are now very clear about the tutorial, So now go to follow the small series of the tutorial to make it yourself.