Point-to-Point Wireless Network Bridge solution

Multi-point realization of wireless interconnection, can be used a little to many points, relay and other ways to achieve. Different ways of joining can be chosen according to different requirements and different environments. This is only a little bit of a connection to two points.

ABC three dot interconnect. Information Center in a, where AB, ac are visible. We can set a as a central node, B and C to 2 terminal nodes. The schematic diagram of the network connection is as follows:

Programme description:

Using outdoor wireless network bridge equipment, A and B, C interconnection. Place a wireless bridge equipment in a, at both ends of B and c each place a wireless outdoor bridge equipment, connect the antenna through the feeder, the three point of wireless communication will be built up. Wireless network equipment through the Super five-type twisted-pair cable to connect all over the network switch. So the three networks can be integrated.

A central end: Wireless bridge equipment with super five line directly connected to the building room of the switch, the antenna uses a sector antenna.

B, C-end: In the wireless bridge equipment, with super five line directly connected to a switch, the switch directly connected to the computer terminal. Antennas Use directional antennas.