Tp-link ID Send request failed What's going on?
Tp-link ID Send request failed reason:
The root cause of this problem is that there is no connection between the router and the Tp-link cloud server, possibly because the router is not currently connected, the cloud server is temporarily abnormal, some specific broadband line issues, and so on.
User and Tp-link Cloud server communication diagram
You can troubleshoot by troubleshooting:
First confirm that the mobile phone or computer connected to the Tp-link router can access the Internet normally, and then solve it according to the following methods;
Case ONE: Mobile phone computer can be normal Internet.
If the mobile phone computer can be normal through the Internet connection router, and the Tp-link ID send a request failed, it may be tp-link cloud Server A transient or poor network line caused by the proposed wait 2-3 minutes, the re-operation will still exist "request failed" error prompt.
If the problem persists, try changing your phone/computer's DNS and try again to see if it solves the problem. If there is still a problem, it is likely that the local broadband line can not connect Tp-link cloud server caused by the proposal tomorrow after a few days to try again, long-term unable to connect, you can contact Tp-link customer Service Phone 400-8863-400 to get help.
Situation two: Mobile phone computer can not access the Internet
If the mobile phone/computer connected to the router is not connected to the broadband Internet, then naturally can not connect the Tp-link cloud server, will naturally appear tp-link ID send a request failure prompts.
The workaround is whether the Tp-link ID setting is normal, broadband account password is filled with errors, broadband line is not a problem, you can first check the router and extranet connection network cable, router settings, etc. (if the router settings are no problem, you can contact the broadband operators, check the broadband line is faulty), until the Internet , then try the general can be solved.