Ultraiso+u Plate +WIN8 Reload System

Ultraiso+u Plate +WIN8 Reload System

Required: UltraISO, formatted USB disk, the corresponding WIN8 CD-ROM image file:

1, write the Win8 installation file to the U disk:

Open Win8 Mirror file with UltraISO, select "Start"-"Write hard disk Mirror";

In this process may be prompted to need to format the U disk, the point of determination can be;

For write methods, it is best to use the "usb-zip+" approach.

2, Set boost startup mode:

Start the computer into the Boost Settings page, choose USB First boot, this different computer also has

The different setting method, the concrete may refer to the printing on the on-line data;

Reboot to start installation from U disk;

3, pay attention to pull out u disk

In general, you need to restart several times in the installation process, if the U disk has been plugged in on the computer will cause each time to start again from the U disk;

So should be in the system copy good installation files in the first reboot when the U disk unplugged;

You should also pay attention to this problem when installing with CD-ROM.