What to do if the Soyo motherboard does not boot

In some cases, our Soyo motherboard does not start, what should we do? Then the following from the study of small knitting to tell you that the Soyo motherboard does not start the solution it, hope can help you Oh!

Soyo the motherboard does not start a workaround:

1, CPU aspects of the problem

CPU does not have power: Use the multimeter to test the three (or one) field tube around the CPU and three (or one) rectifier diode, check the CPU is damaged.

CPU socket has a shortage of needles or loose: This type of fault performance is not lit or irregular crash. You need to open the upper cover of the CPU socket surface and carefully observe whether there is a deformed pin.

CPU Socket Fan Fixed clamp fracture: You can consider using other fixed methods, generally do not replace the CPU socket, because manual welding is easy to leave trouble. SOCKET370 CPU, its radiator is fixed through the CPU socket, if the fixed spring plate is too tight, the demolition must be careful, otherwise it will cause plastic clips break, there is no way to fix the CPU fan.

CMOS set CPU frequency is not: As long as the elimination of CMOS can be resolved. Clear the CMOS jumper is typically near the lithium battery on the motherboard, its default position is generally 1, 2 short circuit, as long as it is changed to 2, 3 short-circuit a few seconds to solve the problem, for the old motherboard, such as the jumper can not find, as long as the battery off, to boot display into the CMOS settings after the shutdown, The battery can also be installed to let the CMOS discharge.

2, motherboard expansion slot or expansion card problems

Because the motherboard expansion slot or expansion card problems, resulting in the card, sound card, such as expansion cards, the motherboard does not respond, resulting in no display on the boot. For example, brute force disassemble the AGP video card, cause the AGP slot to crack, can cause this kind of trouble.

3, the memory aspects of the problem

Motherboard does not recognize memory, memory corruption, or memory mismatch: Some old motherboards are more critical of memory, once plugged into the motherboard can not recognize the memory, the motherboard will not be able to boot, and even some of the motherboard has no fault prompt (tweet). In addition, if you plug in different brands and types of memory, it can sometimes cause such failures.

Broken pins or burns in memory slots: sometimes because of excessive force or improper installation method, the reed in the memory slot is deformed and broken, so that the memory slot is scrapped. Note: When inserting the memory strip, should force vertically, do not sway around. Before unplugging the memory strip, be sure to unplug the power from the host, prevent the use of the STR function when the memory is charged, burn the memory bar. In addition, do not install the memory back, so as not to burn the memory after the battery. But now the motherboard, generally have to prevent the design, will not insert the reverse.

4, motherboard BIOS is damaged

Important hardware data is stored in the BIOS of the motherboard, and the BIOS is a more vulnerable part of the motherboard, which is vulnerable to damage and can cause the system to fail to function.

This type of failure typically occurs because the motherboard BIOS is damaged by the CIH virus. General BIOS

Additional motherboard set U disk Startup method:

First the U disk is made into U depth u disk Startup disk, then go to the relevant Web site download win7 system to save to the U disk Startup disk, restart the computer to wait for the boot screen press start shortcut, select U disk start into the U depth main menu, choose "02" u depth WIN8 PE standard version (new machine) option, Press ENTER to confirm, as shown in the following figure:

Enter the WIN8PE system, will automatically eject the installation tool, click "Browse" to choose to save to the U disk win7 system image file, the C disk as a system disk, as shown in the following figure:

Wait for the U depth PE installed tool to automatically load the win7 system mirrored package installation file, simply select the installation disk location and click the "OK" button, as shown in the following image:

At this point in the pop-up prompt to click on the "OK" button, as shown in the following image:

Then the installation tool starts to work, and we need to wait a few minutes, as shown in the following figure:

When you are done, you will be prompted to restart your computer and click the "Yes (Y)" button, as shown in the following image: