Hosting network settings in WIN8 system

There is a built-in hosted network within the network share in the WIN8 system, but it will be set up. But how to set it! Now let's take a look at the specific operation!

Windows 8 systems also have the same built-in network share as Windows 7 systems. Here's a look at how to set up:

1. See if your computer supports network sharing

In the command prompt (at the end of the article), type: netsh wlan show drivers, and then enter. As follows:

Find "Supported hosting network", if the following is "yes", congratulations, your computer support hosting network can be shared, otherwise, it is another thought of his FA!

2. Set the user name and password for the shared network

At the command prompt, enter: netsh wlan set hostednetwork mode=allow ssid=wifiname key=wifipasswd carriage return

The SSID is set to the WiFi name, key is the password entry

After the carriage return, it will show

If it appears as shown in the three line above, congratulations, set success.

3. Start the Hosting network

Enter at the command prompt; Netsh wlan start hostednetwork

After the carriage return, the following appears:

4. Turn off the hosting network

At the command prompt, enter: netsh wlan stop hostednetwork

Enter the following:

5. Problems that may be encountered

You may fail to start in the third step as follows:

Right-click My Computer--manage--Device Manager--network adapter, check to see if there is a yellow flag in front of the Microsoft Kernel Debug network adapter, if so, you did not start, right click-Start, and then try the 3rd step to start successfully. If still not, you can try to update the network card driver and other methods (not tried)

6. Win 8 command prompt start mode

Micro software +r: input cmd, enter

In the lower-left corner of the desktop, right-click the mouse, and in the shortcut menu that appears, select command Prompt/Command prompt (Admin)