Macd basic usage

Basic usage 1. macd Golden Cross: Diff breaks through the DEA from bottom up, which is a buy signal. 2. macd dead cross: Diff breaks through the DEA from top to bottom to sell signals. 3. macd green to red: The macd value changes from negative to positive, and the market changes from short to multi-headed. 4. macd red to green: The macd value changes from positive to negative, and the market changes from multi-headed to short. 5. When diff and DEA are both positive values, that is, when they are all above the zero axis, the trend is the multi-headed market. Diff breaks through the DEA and can be purchased. 6. diff and DEA are both negative values, that is, when they are under the zero axis, the trend is a short market, and diff falls below the DEA to sell. 7. When the trend between the DEA line and the K line is deviated, the reverse signal is returned. 8. DEA has a high loss rate when consolidating data. However, if combined with RSI and KD indicators, it can be used to compensate for the disadvantages. macd is used to calculate two different speeds (in the long term and mid term) the exponential smoothing moving average (EMA) deviation to serve as the basis for the analysis and determination of the market. Diff branch first calculates the short daily exponential smoothing moving average line and the long daily exponential smoothing moving average line, respectively, as EMA (short) and EMA (long ). Evaluate the difference between the two exponent smoothing moving averages, that is, diff = EMA (short)-EMA (long) DEA evaluate, and then calculate the average exponential smoothing moving average of the M day of diff, as DEA. Macd then uses diff to reduce the DEA to obtain macd. Macd is usually drawn as a column chart with zero axis fluctuations. In the drawing, diff and DEA form two fast and slow moving averages, and the buy and sell signals are determined by the intersection of these two lines. Obviously, macd is a medium-and long-term investment technology tool. Lack of time, the system draws short = 12, long = 26, mid = 9 diff line, DEA line, macd line (columnar line) on the secondary graph ).