Group ps2251-67 successful mass production tutorial

At present, there is no complete online ps-2251-67 production tutorial personal toss a few days comprehensive various posts finally completed Group Union2251-67 production of master Toshiba Flash Pellets
Note: This tool can only be done under XPSP3 if it is unsuccessful, please shut down or uninstall the security software and the anti-virus restart again (to prevent them from scanning U-disk failure)
I spent a few days in the Win7 to hold the dead horse when live horse doctor's mood on my dad's XP ran up and down time error failed to modify the correct system time after a successful.

Software to use
Chipeasy Chip worry-freeV1.5.6.6 Official Edition ( U-Disk chip Detection Tool, Ssd,u disk Master)
PS 2251-67 Production tool v3.63 (with new 67 firmware)
Cluster PS 2251-67 USB Low-grid repair tool v2.11.3

Step is still first with the chip worry-free detection of your USB flash drive Master is 2251-67 Master and Toshiba Flash, yes, use this tutorial.
Here are my settings (drawings)

Use the Mpall tool to find a workaround for the error message.

1, the "IDBLK file version check error" error message appears using "Mpall V3.63", Workaround: After the configuration file [Customize Info], add: idblklibrary_version =1.2.10.0
Note: "1.2.10.0" is the version number of "Idblk_timing.dll", please refer to modify (configuration file in the production tool directory Mp.ini file, you can open with Notepad and modify the Save).
2, a "Do Preformat" error message appears with "Mpall v3.60.0b" or "Cluster Mpall V3.63".
Workaround: In the Mpall tool, under "Flash Setting" under the "low-level formatting" option, using the "cluster ps2251-67 Master Low-grid tool" for low-grid, this achieves the same effect. My u disk low-lattice processing after the rate of write reached 12mb/s, Peak reached 18m/s (this value can be discussed).
3, "Cluster Mpall V3.63" appears with a red "Test Lock error" prompt.
Workaround: Use the lower version of "Mpall v3.60.0b". This everyone can master, try different production tools, the premise is to support your master chip model, is not the latest version is the best, the production process of the same product will have different quality differences combined with the use of the environment, there may be a variety of errors resulting in mass production failure, failure not discouraged, Multi-exchange of different production tools, try to different operating platforms, always find a solution.
4, there is no medium error, select the lower lattice can be resolved.

Here are my modified Mp.ini for your reference.
[Pendrivemp]
IC type=ps2251-67
[Parameter Mark]
Parameter type=f1_mp_21
[Customize Info]
USB vid=0x13fe
USB pid=0x4127
String Product Name=disk CD
String manufacturer Name=usb
Inquiry Version=pmap
idblklibrary_version=1.2.10.0
[Configuration]
Reset Serial number=0
File System 1=2
Partition Boundary mb=999999999
[Extra]
Mode=21
[Misc]
Privacy Volume Label=secure
CDROM image=f:\ISO\ Providence Pe.iso
[Advance]
Fc1=0xff
fc2=0x01
Tick=1
[Firmware]
Isp=0
Note that the ISO image file can be downloaded to the site.

Here are the mass production steps:

I believe that before you mass production of this ps2251-67 series of U disk also encountered has been stuck in green do preformat not move, I have tried 3.63 and 3.60.0B are not. In fact, can be, as long as a slight change in the operation of the method can be successful mass production.

Download the production tool after extracting the first configuration file, open the cluster mpall v3.60.0b folder found inside, double-click the following screen popup:



Click on the "OK" button for this tick. Then go to the following screen: On the right tick "Simplified Chinese", Mandarin seems to be comfortable Wow


And then, according to the way I pictured it, tick:

Click Save after you have checked them.

When the above work is done, do not rush to mass production ah, first open the low-grid tool to enter the following screen:



Click "Format" to make a low-grid drive.


Wait for the last few seconds to pop up the following window:


Note: Do not pull the USB flash drive at this time, also do not point certain.

Next open the mass production tool to enter the following interface to prepare for mass production.



Then click "Start" after selecting the mass production file that you have just configured. At this point will be normal production, will not be like the previous card in the green do Preformat not move.

Wait for the mass production of the green bar to go to the end, first pull the U disk, and then plug in the U disk, and finally point the following this OK, as shown below:



After re-discovery of the USB drive, it will be successful. I wish you all the success of mass production, I hope you reply to the support Oh, thank you



Test information after successful production (actual capacity is 14.8Gb, contains 1 1100M ud hidden partitions and a 500M CD-ROM area):



Amount of postpartumGetInfo：

Of course there are brush firmware production method, the method of brush firmware can be do preformat hook on the, the risk is larger, not recommended.