H3C communication WA1208E wireless encryption mode settings

H3C has always been committed to high-end network products, and its self-developed WA1208E is widely applied in wireless city networks. Its stability, practicability and security have been well received by everyone. Today, we will take WPA/WPA2 encryption as an example to explain how to set the WA1208E wireless encryption mode.
1. First, create the SSID name [H3C] ssid wa1208New ssid! 2. Configure the link-level authentication mode Supported by SSID to open-system [H3C-ssid-wa1208] authentication link open-system 3. Configure WPA/WPA2 security mode [H3C-ssid-wa1208] security-mode wpa wpa2 4 enable 802.1X authentication [H3C-ssid-wa1208] dot1x802.1x is enabled. 5. Configure port control mode for AUTO mode [H3C-ssid-wa1208] dot1x port-control auto 6. 802.1X authentication Mode for EAP Relay www.2cto.com [H3C-ssid-wa1208] dot1x authentication-method eap relayEAP Relay authentication is enabledh3c-2 when logging on to the domain, all users in the domain will go to the RADI of 10.10.10.1. The US server performs verification. 7. Create a RADIUS server group named h3c [H3C] radius scheme h3c [H3C-radius-h3c] 8. Set the IP address and port number of the master RADIUS authentication Server [H3C-radius-h3c] primary authentication 10.10.10.1 1812 9. Set master the IP address and port number of the RADIUS billing server [H3C-radius-h3c] primary accounting 10.10.1 1813 10. The key used to configure the communication between the WA1208E and the radius server is h3c [H3C-radius-h3c] key authentication h3c 11 and an ISP named h3c-2 domain [H3C] Domain h3c-2New domain added www.2cto.com 12, specify the referenced RADIUS server group [H3C-isp-h3c-2] radius-scheme h3c 13 Domain bound to SSID [H3C-ssid-wa1208] bind domain h3c-2 fourteen, bind SSID to Wireless interface [H3C-ssid-wa1208] quit [H3C] interface Wireless-access 1/2 [H3C-Wireless-access1/2] bind ssid wa1208bind the ssid sucessfully! The WPA/WPA2 encryption mode settings of huasan communication WA1208E have been completed. Finally, let's talk about the key part of the Configuration. Make sure that the configuration of the authentication key is consistent with that of the Radius server, in addition, ensure that the authentication and billing port configurations are consistent with those on the Radius server. This article is from