Home How to install two routers so that the family no network blind zone

Now, the home is installed wireless routers, so that more people can surf the internet, however, wireless router is a disadvantage is that the signal is unstable, some rooms will not receive signals, then we can install a router, so that the family no network blind zone.

With wireless router A as the primary wireless router, connect the ADSL cat and network cable, while wireless router B establishes a WDS connection via wireless router A.

Wireless router

The steps are as follows:

First, set up a route can be networked, wireless router basic settings.

Second, wireless router B settings.

1. Through the network cable, enter the route at the bottom of the IP, account and password, login b route, modify LAN port IP address. In the network parameter-lan port setting, modifies the IP address and a router to be different (prevents the IP address conflict), like 172.168.1.2, saves, the router automatically restarts.

2. Enable the WDS feature. Once the reboot is complete, restart wireless router B with the changed LAN port IP address and check "open WDS" in the Wireless settings-basic settings. Here the SSID is set to the same as the recommendation a router, so that you can roam within the three router coverage, which means that as long as you are connected to the network at a random point within this range, you can surf the Internet at another point in the range without reconnecting.

Basic settings

3.WDS settings. Click "Scan" to search around the wireless signal. Select the B router SSID number in the list of scanned signals, tp-link_841_b in the following figure, and click "Connect".

Sets the channel to be the same as the B router channel. Set the encryption information the same as the B router, "save".

4. Shut down the DHCP server. At the DHCP server, select "Do not enable", "save", and restart the router.

Wireless Router b configuration complete. At this point, wireless router B and wireless router B have successfully established WDS.

The operation of installing two routers at home is as shown above, to be set up in wireless router B, mainly IP, account and password as well as WDS, server and so on. No friends can follow the above steps to operate, I hope to help you.