Home Wireless Router configuration and FAQ summary

Home Wireless Router configuration and FAQ summary

One, the router set up the Web page is stored in the router chip, when set WAN interface (router on the Blue interface) do not need to connect network cable

1, the router set up the Web page stored in the router chip, when set WAN interface (router on the Blue interface) do not need to connect network cable.

Second, can not enter the management interface, or can't open 192.168.1.1

Method One,

fwr701 type can attempt to use 10.0.0.1 entry (browser input 10.0.0.1)

If you use this method to enter after the entry, please modify the router address to normal network segment, see Modify router address to prevent conflicts with the network routers, light cats, etc.

Method Two:

1, click "Start-run-input: cmd and OK",

2, in the CMD interface input: ipconfig

3, view the default gateway ... : The IP address that follows, (WIN7/8/10 is the default gateway address)

4, will this IP input browser

* Reset the router if the address is empty (please reset the router by the RST key for 10 seconds) and try again

Method Three:

XP User: Double click on the bottom right corner icon, click "Support" tab, click "Fix", then view current gateway

WIN7/8/10 User:

1, open "Network and Sharing Center"

2, click "Local Connection", double-click IPv4 address, automatically obtain IP address and DNS server

3, click "Diagnosis", after the diagnosis, click "Details", view the network card information, find "IPV4, default gateway", view the current gateway

4, open IE Browser, enter the current gateway IP address.

* Reset the router if the address is empty (please reset the router by the RST key for 10 seconds) and try again

Third, modify the router address to prevent conflicts with network routers, light cats, etc.

* After modification, restart the router to take effect. Here to enter the address of the router, after the modification of the router to log in with the new address changed.

FWR Series (black router) login router-network parameters-lan port settings, modify the IP address here. (Figure below)

FR Series (white router) Click "Network Settings", "LAN/dhcp settings", change 192.168.1.1 to 192.168.11.1, and the preferred DNS server to 192.168.11.1, click OK, wait 30 seconds (below)