How can I extend a wired network to a wireless network through a wireless route?

Source: Internet
Author: User

In the existing wired LAN, you want to use a wireless router to build a local wireless LAN. A wireless router can only be connected to a vswitch. How can I use it?

This type of wireless router is added due to network expansion. When you add this device to the original wired network environment, there are multiple solutions based on the wired network devices and different environments. You can solve the problem as follows.

First, let's take a brief look at the working principle of the wireless router. It integrates wired routing and wireless access functions. Like a wired router, it also provides four LAN ports. The network structure of shared-bandwidth wired access is "ADSL Modem + broadband routing device + switch ". Therefore, if the original wired network uses this structure, it is very simple. The connection method is as follows:

Connect the ADSL line to the ADSL Modem, connect the WAN port of the wired router to the WAN port of the ADSL Modem, and connect any LAN port of the wireless router to any LAN of the wired router. Through such a connection, the remaining LAN ports of the wired router can connect to the fixed desktop, while the wireless router can be used as a pure AP for the mobile shared Internet access of the laptop.

Wired and wireless connection

After completing the hardware connection, follow the product manual to go to the wireless router management interface and change the IP address to the same network segment as the wired network. Then, only configure the "Wireless Settings" parameter of the wireless router, other features, such as WAN port parameters and NAT routing, are disabled. With this configuration, the wireless router is actually a pure AP, which is responsible for distributing the broadband signals of the wired network to the laptop wirelessly. The coexistence of wired and wireless networks is realized.

Fill: Of course, the ADSL line can first connect to the WAN port of the wireless router, and then connect the wired router to the LAN port of the wireless router. In this way, although the routing functions of the two devices have been used, its drawbacks are also obvious.

In this way, the desktop computer needs to be connected to the Internet through two routes. In practice, the experience gained is that the network speed of the Internet through the route shared bandwidth will be a little slower, and here there will be two routes, the network speed will be slower, and the laptop and desktop will be in two different network segments, and the configuration and mutual access are both complex locks.

Therefore, this method is not recommended. However, this method also has a major advantage, that is, you can use the built-in firewall function of the router to improve network security.

  1. The perfect combination of wireless networks and wired networks is the final principle.
  2. Cost-effectiveness: How to build a wireless network?
  3. Features of wireless networks: wireless networks are not just substitutes for wired networks.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.