How do I transfer data from a laptop to a new hard drive?
Tools/raw Materials
Ghost
Method/Step
First, prepare a removable hard drive box to load the new hard drive into the removable hard drive box.
After the notebook hard drive is removed, the surrounding bracket is removed, the SATA interface is inserted into the hard disk box, a removable hard disk is installed, and if only the temporary copy data is used, then the shell can not be installed.
Remove the hard drive carrier
Next, put the hard drive on the removable hard drive box and twist a screw in the back to temporarily fix it.
After you've done your homework, you can shift the bulk of your data on your notebook.
Once you've prepared your hardware base, you can start moving the data.
Insert the new hard drive on the hard drive box and then on the laptop
Put the old hard drive into the mobile hard disk box inserted in the laptop USB interface, and then put the new hard drive into the notebook, with a prepared USB disk boot or Windows PE CD-ROM boot and boot to the PE system.
After entering the Chinese Cabbage PE system, enter Ghost 11.2, select disk to disk.
Select a good source disk, directory disk, according to the hard disk capacity to judge the new and old hard drive.
Enter OK after a cup of tea, waiting patiently, about 1 hours, complete, remove the USB old hard drive, start the system, you will develop, all the contents including the system and the original exactly the same, there is no change, while the time of the system is saved, the partition panel and the original, the same, quite worry, is not very convenient.