How does a tplink router reset a vro?

TP-LINK network and communication products:
1. Broadband router 2, wireless 3, switch 4, ADSL 5, Print Server

Broadband Router:

1), with M1, M2 lamp TL-R4XX, TL-R4XXX next-generation network Bar and TL-FR5300 firewall router reset method:
There is a small hole in the front/back panel of the vro with the word "Reset" next to it. Turn off the power of the vro and hold down the Reset key to find a tip like a pen tip, power up the vro (you still need to press and hold the Reset key). Wait about 3-10 seconds. After the M1 and M2 lights flash three times at the same time, the vro can be relaxed and Reset successfully;
Note:
After resetting, the router will be restored to the factory settings. The default logon IP address is 192.168.1.1, and the default username and password are admin/admin, when logging in, please note that your computer's IP address is in the 192.168.1.X (X is 2--254) network segment!

2), with PWR, SYS light router and TL-FWR1100, TL-FR1000 two firewall router reset method:
Disconnect the vro power, hold down the Reset button with a tip object (such as a pen tip), and re-plug in the power (this process still needs to hold down the Reset key). When the SYS indicator is blinking, release the Reset button. Then, the router will return to the factory status.
Note:
The power cannot be switched off before the router is fully started. Otherwise, the configuration may not be restored to the default value. After resetting, the router will be restored to the factory settings. The default logon IP address is 192.168.1.1, and the default username and password are admin/admin.
SOHO routers using this reset method are: TP-R410 +, TP-R460 +, TP-R860 +, TP-R1660M.

3) methods for resetting a vro:
TL-R420 Reset method: press the Reset key about 2 seconds after the release, the router will restore to the factory default value. Default management address: 192.168.1.1; default username and password: admin/admin;
TL-R400 + Reset method: power off, hold down the Reset button, then turn on the power (this process still needs to hold down the Reset key), release the button in about 5 seconds, the router will restore to the factory default value. Default management address: 192.168.123.254; default user name and password: admin/admin;
TL-R400 Reset method: press the Reset key about 2 seconds after the release, the router will restore to the factory default value. Default management address: 192.168.123.254. Default user name and password: admin/admin.

Wireless:

TL-WR3xx/TL-WR5xx/TL-WR6xx reset method

TL-WR340G +/TL-WR541G + (1.6)/TL-WR641G + (1.6): When powered on, hold down the RESET key for more than 5 seconds, and the router restores to the default factory value. Default management address: 192.168.1.1; default user password: admin/admin;

 

Conventional RESET method: first turn off the power supply, then hold down the RESET key, and then turn on the power, wait until the system light flashes three times and then release the RESET key, the router will be restored to the factory default value. Default management address: 192.168.1.1; default username and password: admin/admin;

Bytes ------------------------------------------------------------------------------------------------------

TL-WR7xxN/TL-WR841N/TL-WR941N reset method

TL-WR7xxN/TL-WR841N V3 V5/941N V2 V4: powered on, press the RESET key for more than 5 seconds, the router will be restored to the factory default value. Default management address: 192.168.1.1; default user password: admin/admin;

 

TL-WR841N V1: first turn off the power, then hold down the RESET key do not put, turn on the power, wait for the system light to flash three times and then release the RESET key, the router will restore to the factory default value. Default management address: 192.168.1.1; default user password: admin/admin;

 

TL-WR841N V2: When powered on, the router restores to the factory default value after pressing the RESET key three times in five seconds. Default management address: 192.168.1.1; default user password: admin/admin;

Bytes ------------------------------------------------------------------------------------------------------

Wireless AP reset method

TL-WA501G + 2.0 RESET method: Power-on state, press the RESET key for more than 5 seconds, the router will restore to the factory default value. Default management address: 192.168.1.254; default user password: admin/admin;

TL-WA501G + 1.0 RESET method: first turn off the power, then press the RESET key do not put, and then turn on the power after 3 seconds, the SYSTEM light first turn off and then on, the AP will be restored to the factory default value. Default management address: 192.168.1.1; default username and password: admin/admin;

 

TL-WA501G RESET method: first turn off the power, then press the RESET key do not put, and then turn on the power after 3 seconds, the SYSTEM light first turn off and then on, AP will restore to the factory default value. Default management address: 192.168.1.1; default username and password: admin/admin;

VSwitch type:

Switch with reset key: TL-SL2210web, TL-SL2218web, TL-SL2428web, TL-SL2452web, TL-SG2109web, TL-SG2216web, TL-SG2224web. The methods for resetting these vswitches are the same as those for resetting vrouters: Power-off first, hold down the Reset key, and power-on again. If all the lights flash, the vSwitch is Reset successfully. The default management address is 192.168.0.1, and the default user name and password are supervisor/supervisor;

TL-SF2226P +/TL-SL2226P + reset method: With the TP-LINK SSU hypervisor, click "device"-> "restore factory settings", the switch will be restored to the factory default value. The default management address is 192.168.0.100, and the account name and password will not be restored. You can also connect to the vSwitch through the serial port through the super terminal and Telnet to perform the reset operation. (Note: If the password of a common user is forgotten, you can only log on to the Super Terminal using the administrator password. The administrator password is set to admin and cannot be modified. After logging on, you can directly change the password of a common user)
TL-SF2108P, TL-SF2109P, TL-SF2808P, TL-SF2216P, TL-SF2224P, TL-SF2232P, TL-SL2226P, TL-SF2008, TL-SF2117P, TL-SF1016V, TL-SF1024V, TL-SG2008 reset method: This series of switches use TP-LINK SSC program for management, you can log on without the user name or password;

TL-SF3226P, TL-SF3008, TL-SF3117P, TL-SL3428, TP-SL3452, TP-SG3109, and some WEB managed switches reset method: connect the switch through a serial port, use a super terminal to log on to the switch, there is a prompt interface before starting the switch, press the CTRL-B key to enter the bootmenu, see "Please Input Bootrom password:" and press enter directly, then select "3: Restore factory default setting" in the interface that appears ", restore the switch to the factory settings, and then select "5: Reboot. The default management address is 192.168.0.1, and the default user name and password are supervisor/supervisor.

ADSL:

TD-W8900G/W8910G/W8920G Reset method: disconnect the router power, with a tip object (such as pen tip) hold down the Reset button do not put, re-plug in the power, lasting more than 5 seconds, release the Reset button, reset successful.

TD-8820 (including enhanced) Reset method: When the TD-8820 is running, hold down the Reset button with a tip object (such as a tip) for more than 15 seconds. The Reset button is released and Reset is successful.

TD-W89541G (including enhanced) Reset method: When the TD-8820 is running, hold down the Reset button with a tip object (such as a tip) for more than 5 seconds. The Reset button is released and Reset is successful.

TD-8800 Reset method: In the case of continuous power, continuous press Reset key three times, all the indicator flashing, Reset successful. Default management address: 192.168.1.1; default username and password: admin/admin;

TD-8810/TD-8810 +, TD-8610/TD-8610 + Reset method: first power off, then press the Reset key, then turn on the power, wait for about 3 seconds, Reset successful. Default management address: 192.168.1.1; default username and password: admin/admin;
TD-8830/TD-8831 Reset method: In the case of continuous power, hold down the Reset key for about 10 seconds, and then release, Reset successful. Default management address: 192.168.1.1. Default username and password: admin/admin.

Print server class:

TL-PS110P/PS110U Reset function key, click Reset key to restart.
TL-PS110P/PS110U Reset method: first power off, then press and hold the Reset key don't relax at the same time power wait 5 seconds after the release, that is, restore the factory settings. After the management password is reset, it will become the initial password-less status. The IP address of the TL-PS110P is not restored to the default 192.168.0.10, but remains the last configured IP address. Note: The Reset key of the TL-PS110P is on the side and the reset hole is small.
TL-PS210U Reset method: disconnect the power, hold down the Reset key do not put, and then connect to the Power 5 seconds after the release of the Reset key, will make the print server to restore the factory default value, IP address will return to the default IP address: 192.168.0.10.
TL-WPS510U RESET method: power off, hold down the RESET key do not put, power on 15 seconds after releasing RESET key. Wait about 40 seconds and the device starts successfully. TL-WPS510U works in ad-hoc mode by default, SSID is WLAN-PS, default management IP address: 192.168.0.10, management User Name: admin, password: 0000 (4 digits 0 ).
Our printing server's default management IP address is 192.168.0.10. Before using it, determine whether the IP address of the computer and the printer server is in the same network segment.