How does Sony M36H flash? M36H wire brush tutorial (save bricks)

I. Preparations before Sony M36H flash:

1: Prepare a mobile phone, prepare a data cable, and then have a computer.
2: We want to install the Sony S39H driver on the computer. We can install the driver on the computer as a mobile assistant.
3: We need to download the M36H firmware package before flashing. Download Address: pan.baidu.com/s/1kTLpAQz
4: Download the Flash tool XPERIA FlashTool. Download Address: dl.vmall.com/c0xljv6ok0

II. Now we will start to brush the official M36H firmware package:

1: Download the Flash tool in preparation, and then decompress it. There is a tft-format firmware, we put it in the firmwares Directory of the Flash tool file.

 

2: then, we first install the flashtooldriver, find flashtool-drivers.exe in the flashtooldecompressed package, and then double-click it to select all the items to be selected during the installation process.

3.after the driver is installed, we double-click flashtool.exe(64-bit system runtime flashtool64.exe), select "write", select "flash mode", and click "OK".

After the firmware is selected, clear the data on the right side and check and then confirm the firmware.

4: wait for a while (1 ~ 5 minutes. Don't worry)

 

5: wait for a while and the page shown in the figure below will appear.

6: now we shut down the phone. Wait 30 seconds and press the volume-button to connect the phone to the computer with the data cable.

In this case, we should not rush to loosen our hands. We need to see the green light in the upper left corner of the phone to loosen the "volume -". If this is the first time the opportunity is slow, we just need to wait.

7: Flash tools will display the specific status during the flash process.

8: as shown in the following figure, the progress bar is finished.

9: Well, if the following interface appears, it means the flash is successful.