How does the mercury router set the speed limit

Today many families or office space through the router to achieve wireless Internet access, many computers and smartphones and other devices are sharing a network of Internet. In order to reasonably allocate the bandwidth resources available to each computer/mobile phone, and to avoid the use of excessive bandwidth on one computer, the Internet will need to be set up in the router for IP bandwidth control. The following is the culture and education of the mercury router how to set the speed limit, the following is the mercury Mercury wireless router broadband control speed limit set method.

First step: First, the computer must be connected to the Mercury router network, and then open the browser in the computer, type Mercury Mercury wireless router login address: 192.168.1.1 and open, and then enter the router Administrator password login, as shown in the figure.

Step two: Then check that you started the DHCP server, and look at the address pool start and end addresses, as shown in the following figure.

Ps. This generally defaults to open the DHCP server, in addition to the default address pool start Address: 192.168.1.100-192.168.1.199, the default this setting, if not such settings, you can set these parameters, and then save.

Step three: Then click "Broadband Control" in the left-hand menu to the router speed limit setting on the right. Check the "Open bandwidth control", and then select "Broadband line Type", the general choice of "ADSL line", the bottom of the uplink total broadband and downlink total broadband is based on their own broadband size fill, completed, click on the bottom of the "save" , as shown in the figure.

Conversion Unit: 1MKBS=1024KBS, for example, the upper part of the image of the broadband is 10M, then fill in the 10x1024=10240kbps.

The bandwidth control function can control the Internet bandwidth of LAN computer. In this page, you can turn this feature on or off, and set the broadband line type and bandwidth size, but also the bandwidth control rules to add, delete and so on. The bandwidth control rule can only take effect if the total switch of bandwidth control is turned on, otherwise it will fail.

Note: Select the Bandwidth line type and fill in the bandwidth size, please select and fill in according to the actual situation, if not clear, please consult your bandwidth provider (such as telecommunications, netcom, etc.).

Fourth step: Click the "Add new entry" below the bandwidth control rule, and in the action option that pops up, set the following figure:

Setup Complete

The following operations mainly according to their own network broadband situation and the use of user decisions, where the IP address section for the previous set of DHCP server assigned IP address, the port can not fill out, if you want to filter certain ports, you can fill in accordance with the requirements, the following uplink and downlink can be set according to their own

The above is Mercury Mercury wireless router speed limit setting method, generally set relatively simple, but need to combine the number of their own use and broadband size reasonable set broadband uplink and downlink, so that can play a better role in allocating broadband resources.

Ps. If some computers do not want to be restricted by routers, users can manually set their computer IP addresses or control them at the speed limit of a router. For example, we can set the computer IP address between 192.168.1.2-192.168.1.99, this part of the router is not limited by the specification.