How Secure CRT connects to the CentOS system inside a virtual machine-when the host uses the wireless network, the author's original welcome reprint

The first step: Set up your own wireless network, and share to VM8 this virtual network card

The second step: check the IP address of the VM8 network card, is 192.168.137.1

Step three: Set the configuration of the virtual machine: Select the VM8 nic and Nat

Fourth step: Set the IP address of the CentOS system inside the virtual machine:

Command: Vi/etc/sysconfig/network-scripts/ifcfg-eth0

IP address and the second step inside the 192.168.137.1 in the same network segment on the line, the gateway is the IP address of the VM8 network card: 192.168.137.1, the other settings do not change

This is the command to change the DNS address:

Fifth step: Restart the NIC, two commands as shown:

Sixth step: CRT Connection:

Enter the IP address of the virtual machine. Finally, remember to enter your account and password

I do not guarantee that the entire network environment, but I did not test any problems, different people's home network environment, some routers are bound to the MAC address

How Secure CRT connects to the CentOS system inside a virtual machine-when the host uses the wireless network, the author's original welcome reprint