How is the FLV video converted?

Many of my friends asked me how to convert the FLV video on my blog. Because I have never had much time to write a tutorial, I will share it with you after I finish writing it ....
-----------------
1. Ultra video to flash converter is the best and fastest software for FLV conversion. It supports most video formats and supports RM format. You can use the following;
Step 1: load the video you want to convert

Step 2: Click Options to set the video to be converted. Pay attention to the section in the red box,
1. It is best to set the size to 460, because the width of the peninsula blog is the most suitable width, and the height is automatically fit according to the width, so the height does not need to be automatically fit him, do not select the keep Origianl Size Option next to it. If you select this option, it will be useless.
2. You can customize the settings of the audio sample rate. I used this setting.
3. Video bit rate: the size of each image. Generally, it is enough to set it to 504.
4. audio bit rate: audio. Set it to 112.

Step 3: click "batch" and return to the page. Click "convert" to start conversion. The conversion speed is very fast.

Step 4: when there are two red boxes in my circle below, it will be successful!

----
Problem: Sometimes the converted video and audio are not synchronized, so you must check them after the conversion (because many videos are transferred in and out, each software has a different encoding for the video, there may be a problem with the code converted from Ultra video to flash converter. If it is a good source file, the audio and video may not be synchronized) if it does not affect the quality of your blog, we will launch the following software:
-----
2. Middleware Pro: it is also the best software. The only drawback is that it is slow but the conversion quality is great. It is worthwhile to sacrifice time. Now we will introduce:
Step 1: Pay attention to the red box above. I won't talk about input/output. You should know what this is. Preset-indicates the conversion quality. I recommend using this setting.

Step 2: Click Vid/aud to go to this page and make settings: Pay attention to the Red Circle, the principle is the same as the above software. After setting, click flie and return.

Step 3: Start transcoding by pressing the red circle. You can take a break:

Step 4: transcoding successful! Be sure to see how it works! Do not affect your video quality!

---
Generally, I use ultra video to flash converter, unless I have.

You can download rivaencoder from the FLV video. Now, let's try FLV! Transfer your own clear video!

----- Download related software --
1. Ultra video to flash Converter
2. Middleware pro