How to make the router more convenient to use

With the development of the network, the use of routers more and more widely, almost every modern family will use the router to share the Internet, this article introduces the router in the use of some of the tips, you know, if the computer's IP address and broadband router use of the IP address is not in the same network segment, may result in Web page content not being successfully accessed.

First, look at the broadband router to use the default IP address is what, and then use the manual method of computer network card parameters to modify to ensure that the network card address and broadband router address in the same network segment.

For example, if the broadband router uses an IP address of 192.168.1.1 and the mask address is 255.255.255.0, then we can open the local Connection Properties setting window in the local computer system, select the Internet Protocol parameter, and click the Properties button. Then, in the Internet Protocol's property settings interface, modify the IP address of the network card to 192.168.1.xxx, where "xxx" range from 2 to 254, while the subnet mask address of the network adapter is set to 255.255.255.0, the default gateway address used by the NIC To 192.168.1.1 To ensure that the IP address of the computer is in the same network segment as the IP address used by the broadband router.

Second, enable the broadband router built-in DHCP service to automatically assign IP addresses to computers. When you use this method, we first run IE browser program, and then in the Internet Explorer window of the address bar, directly enter the IP address of the broadband router, click Enter, and then in the Account Login window correctly enter the account password, after the smooth access to the Broadband Router Management window, and then click the Window menu bar The network parameter-dhcp service, in the subsequent setup interface, set the DHCP service parameters well.

Next, open the Local Area Connection Properties Settings window in the local computer system, select the Internet Protocol parameter, click the Properties button, and then in the properties settings interface of the Internet Protocol, set the IP address of the network adapter to "Get IP address automatically" and set the DNS parameter to " The DNS server address is automatically obtained.

Complete the above set up operation, the computer power and broadband router power all off, and then first connect the broadband router power, wait until the broadband router is stable, then connect the computer power, so that it can ensure that the computer through the broadband router successfully dial-up Internet.

Third, there are many broadband service providers in order to prevent users too much computer access to the broadband router to achieve shared access to the Internet, they will often be in the authentication server on the broadband router's MAC address forcibly bound to limit the number of access to the computer, the first broadband router and Internet connection disconnect, Then the computer to bind the MAC address to the LAN port of the broadband router, and then through the broadband router's own MAC address replication function, the local computer card to clone the MAC address of the broadband router device WAN port, and finally the broadband router device restart, so we will Can remove the default address bindings for broadband routers.

Four, in the use of broadband routers in the process of Internet access, it is often possible to appear on the Internet stability phenomenon, such as frequent drop line, long time can not visit, serious words will always be unable to surf the internet. When encountering this kind of internet instability malfunction phenomenon, we may as follows the following procedure to carry on the investigation:

1, check and broadband routers connected to the LAN environment, whether there are multiple DHCP servers exist, if there is, then the computer's IP address is very easy to chaos, which can easily lead to computer network instability or even not online.

In general, devices such as broadband routers, Windows servers, and broadband cats are likely to enable DHCP servers, so we need to check each of these devices to ensure that only one of these devices has a DHCP service enabled and that the rest of the devices disable the DHCP service.

2, to check whether the broadband router is in the four-week ventilation, good heat dissipation position, if it is placed not ideal, then work for a period of time after a very easy to overheat phenomenon, serious words can cause the internet instability of the fault occurred.

So, when we unfortunately encounter the Internet instability failure, we must touch the broadband router shell is hot, if it is the basic can be concluded that the Internet instability is due to the broadband router cooling caused by instability.

If the above check can not eliminate the Internet instability, it is necessary to the broadband router's computer system for virus killing work, because once the computer system accidentally infected with the virus, all kinds of strange fault phenomenon may occur.