Open the network in the control panel, and then open the TCP/IP protocol attribute of the NIC,
Set the ip address to 192.168.1.1 (or between 1 and 253 );
The subnet mask is 255.255.255.0;
The gateway is 192.168.1.254 (the factory ip address of 515)
DNS configuration: Enter the host name, for example, host, and set DNS search to 202.99.96.68.
Enter 192.168.1.254 in the address bar of Internet Explorer) to go to the Web Settings page of the ADSL modem.
A warning screen will appear during the process. Click "Continue" to enter. Click the "Configuration" option in the left-side Navigation Pane, and then select the "WAN connections" option after "Configuration" is expanded.
Record the "VPI" and "VCI" values in the displayed information. Then delete all the items on the Create a new service button on the right (that is, click all the delete, click one, and delete one item until all the items are deleted );
Click Create a new service;
PPPoE routed is selected in the ATM, while MULTU (AUTO) is the first DSL Configuration item );
Click Configure (a table is displayed, so that the input information is not written as mentioned below), where:
Description: you can name it at will, for example, ADSL.
VPI and VCI: Enter the two you just noted!
User name: Your account number is generally a telephone number)
Password: Password
Click Configure;
Click Save config;
Click Confirm at the end, and click OK in the displayed dialog box. Wait for a while until Done appears.
Wait a few seconds after DONE appears, and then click the status in the framework on the left;
Click the name you just named in Description, such as ADSL, which is generally the first one.
The IP address assigned by China Telecom will appear in the table on the right. If the IP address ADDRES is 0.0.0.0, wait a while,
If the ip address is 0.0.0.0 for a long time, the setting is incorrect. You need to reset it. If it is connected, you can view the DNS data to set the DNS on the Nic!
If it is 511, you can use a route setting software!
(T113)