Today I have a very silent driving problem. The P1008 driver for 64-bit Win7 (ljp1000_p1500-hb-pnp-win64-en,hp LaserJet hostbased Plug and play Basic Driver) installation was downloaded on the HP Web side. The results of the installation to the copy files to hard disk This step error, pop-up window "printer software installer has stopped working." No matter the printer is plugged in or unplugged, the error is the same. Considering that there may be a problem with the HP driver for 64-bit support, another 32-bit Win7 machine is selected for installation. The result is still an error.
It took some time to determine the cause of the mistake. When the driver is installed, a directory called HP LaserJet p1000_p1500 series is created under C:Program fileshp. Then SB is a part of the Setup program will continue to copy an HP directory under this directory ... As a result of the death cycle, it hangs ...
1, decompression driver to a directory, such as D:ljp1000_p1500-hb-pnp-win64-en.
2, continue the directory within the Hp1006drv64.cab and Hp1006enww64.cab inside the file into the same directory.
3, plug in the printer. The printer should be found, but not installed on the driver.
4, into the Device Manager (start, equipment and printing, right button, Device Manager)
5, find Da Guo printer driver, choose to update the driver software, browse the computer to find the driver software.
6, select the extracted directory.
7, should be installed ...