Hyper-V wireless network over the extranet

This through the wireless network on the external network also found a lot of articles, most of the writing is not detailed, no way to succeed, the principle is to create a virtual network card, and then the virtual network card created and the wireless card bridge, virtual machine using the virtual network card created, The virtual network card created here refers to the internal network card created with Hyperv, and I write down the specific steps.

1. Open Hyper-V, Virtual Switch Manager

2. Create an internal network

After determining, wait a while, the virtual network card is created successfully

3. Go to Control Panel \ Network and Internet\ network connection, as below, vethernet (new Virtual Switch) This is the previous step to create the NIC

4. Select vethernet (new Virtual Switch) and WLAN2 (Wlan2 is the wireless card I am using) Right-click, select Bridge, this process will disable the network card, wait a few minutes to complete, this step is not

5. Set up the virtual Machine network card, find the virtual machine settings--"Network adapter--" New virtual exchange

This time the network is still not up, the virtual machine network card can not get the correct IP, you need to manually modify the fixed IP

6. Open the virtual machine, manually set the IP, gateway, DNS; Use ipconfig to view the IP, subnet mask, gateway, DNS of the host, and set the result as follows

When you're sure, you can sisu the net.

Hyper-V wireless network over the extranet