Most of the users are led by the optical drive, with CD-ROM to complete the installation system. First, set the BIOS first boot for the optical drive. The operation is as follows. (as an example of the award BIOS) and the AMI bios, and then press the "Del" key to enter the BIOS setup menu (some are press F1 key) after entry you will see the following menu, there may be some differences, but basically the same, But basically it's the same thing. You can use the arrow keys to move the cursor, enter confirm, Esc key back, with Pageup,pagedown and the number of keys to adjust settings, in any settings menu can press the F10 key to exit and save settings, these and the AMI BIOS settings almost!
BIOS setup Illustrated tutorial
Next, let's take a detailed procedure.
1. Set the BIOS for the CD-ROM drive, put the CD in, and boot into the CD-ROM interface from the CD drive.
2. First we will partition the hard disk.
(partitions are not necessary to operate)
Use the system disk with the PQ8.05 Chinese version to complete.
Enter the PQ interface and you will see the size and properties of your hard drive.
Select "Job" "Build"
Now choose to establish as the "primary division of the magnetic field", that is, "primary partition" will be used to install the system.
Next, select the partition type, because it is the ghost system, so any FAT NTFS is OK. Doesn't matter.
The following is the choice of the size of the primary partition, now the hard disk is very large, the smallest also above 120G, so it is recommended to set the size between 10-15g, that is, between 10000m-15000m. Click OK when you are ready to add.
Such a new partition is thus established. Next select unallocated space (where black and white is unassigned). Still choose "Job" "build", this time select "Logical partition Magnetic zone". Partition type and size, according to individual needs, to be allocated. OK, the hard disk partitions we need are well divided.
Here is a key step, is to set "C Disk" is the "main division of the magnetic field" as a function. Click on "Job" "Advanced" "set as action" to indicate whether to set the partition as a function, select "OK"
current 1/2 page
1 2 Next read the full text
