Installation of dual-channel memory bar

Notebook Memory bar has the correct installation method, as long as the "notebook Memory Installation Method Introduction", there should be no risk. Follow these steps to complete the memory installation: 1, the notebook computer turned over on the soft desktop; 2, the back of the machine has a lot of lid, looking for a memory pattern of the lid, it is the memory bin cover. 3. Use a screwdriver to gently unscrew the small screws on the memory compartment lid and open the lid. ...

The memory slots on the motherboard typically use two different colors to differentiate between dual and single channels. For example, the above diagram inserts two identical memory strips into the same color slot, which turns on dual-channel functionality.

Installing memory

When installing memory, open the clip on both ends of the memory socket by hand then put the memory parallel into the memory slot (memory slot is also used to prevent the design, the opposite can not be inserted, you will be able to install the corresponding memory and slot on the gap), with two thumbs down at both ends of the memory slightly downward pressure, hear "snapped" after a sound, That means the memory is installed in place.

Insert two identical memory in the same color memory slot, turn on dual channel function, improve system performance

The current mainstream memory is mainly DDR2 memory, but now in the replacement period, some high-end motherboards also provide DDR2 and DDR3 two kinds of memory slots, but we can identify the gap on the memory slot to identify, through the picture you can see, The length of the gap on the DDR3 and DDR2 memory interfaces is completely different (fig).