topology
Objectives:
- Plan, design, and implement the Internation travel Agency core network.
- Plan, design, nad implement the travel Data Providers Netwrok.
- Allow the networks to communicate via BGP.
- Verify that all implementations is operational and functional according to the guidelines.
Background
The International Travel Agency (ITA) needs both it core network and its travel Data Providers (TDP) network set up. Configre each network to run EIGRP, and use BGP t advertise routes between the.
Requirements
- Use the addressing scheme shown in the diagram.
- Configure the ITA Netwrok to is in EIGRP as 65001.
- Configure the TDP network to BES in EIGRP as 65002
- Disable automatic summarization in both EIGRP domains
- Configure the ITA Netwrok to is in BGP as 65001, and the TDP network to IS in BGP as 65002.
- Advertise the 192.168.14.0/30 and 192.168.34.0/30 networks in both EIGRP as.
- Configure the interfaces on the border routers between the both eigrp as, so they does not send EIGRP packets.
- All routers is participating in BGP. Configure all routers for a full mesh of IBGP peers in each system.
- Peer R1 and R2 using loopback address, not their directly connected interfaces.
- Advertise all loopback interfaces to the BGP process, except on R2, where the only loopback advertised should is LOOPBAC K 2.
- On R2, create a static summary route for the rest of it loopback interfaces nad advertise this static route in BGP.
- R4 should send a summary route to ITA representing all the R4 loopback interfaces.
- R4 should prefer the path to ITA networks via the Ethernet link between R1 and R4. Accomplish the modifying the MED advertised to TDP.
- Routers in the ITA as should prefer the path to TDP networks via Ethernet link between R1 and R4. Accomplish the modifying the local preference of routes being advertised in from TDP.
LAB-CCNP BGP Case Study
