Manual setting of banma barcode printer

Manual printer settings:
Correctly install the barcode, press the paper feed button (the only button on the printer) and turn on the power, when the paper feed key indicator is green and flashing, flashing once, at this time, the current printer configuration parameters will be printed, do not release your hands, wait for two flashes, then release the Paper Import button, the printer will enter the media induction mode, the printer will automatically detect the length of the bar code printing paper, and stop at the correct location to automatically save the print parameters. Press the paper feed button again until the indicator blinks 7 times and then goes off. When the printer is turned off and then turned on, the indicator light is green and does not flash, indicating that the printer is set up successfully. You can print the barcode of the Central Hospital Information Management System (paper size: 5*3 cm ).
Long press the paper feed button to make the indicator light green and blinking. The number of flashes indicates the following:
Flash once: Click the enter button to print the current printer configuration parameters.
Flash twice: when the paper feed button is opened, the printer enters the media sensing mode. The printer automatically detects the length of the bar code printing paper and stops at the correct location to automatically save the printing parameters.
Flash 3 times: the printer automatically adjusts the baud rate of the printer.
Flash 4 times: the printer will restore all settings to factory parameters, automatically test the paper, and automatically save the parameters.
Flash 5 times: the printer enters the print width printing adjustment mode.
Flash 6 times: the printer enters the print depth adjustment mode.
Flash 7: The printer exits the Setting Mode and returns the ready status.

Manual setting of banma barcode printer