Mercury mercury[New Interface] How do I set (Modify) a wireless name or password?

First, Application Introduction

Wireless signal generally refers to wireless Wi-Fi, wireless signal name and password is the wireless Terminal Connection router Internet The most important two information. This article details how to view or modify a router's wireless signal name or wireless password.

The new interface router supports the Guest wireless network (the wireless signal that is used exclusively for guests),

Second, set up the method

1 , access to the Router management interface

The computer uses the network cable to connect the router's LAN port or uses the wireless connection router's wireless signal, opens the browser, empties the address bar, enters melogin.cn (or 192.168.1.1), fills in the management password, the login management interface.

Note : The admin password is a 6-15-bit password set when you first log on to the router, and if you have forgotten, reset the router and set it up again.

2 , view or modify wireless parameters

Here are two ways to choose one.

Methods first, view and modify on the homepage

After logging into the Router management interface, click on the wireless settings below the left, where you can set the name and password of the host network, as shown below:

Note : If you are a dual-band wireless router, you can set the wireless name and password for the 2.4G and 5G signals respectively.

Method Two, viewing and modifying in wireless settings

In the router interface click Advanced Settings > Wireless Settings > Host network , you can set or modify the wireless name and password, Wireless channel, band bandwidth and other parameters.

Note : The dual-band wireless router sets the wireless name and wireless password parameters in the wireless settings 2.4G and wireless Settings 5G respectively.

Important NOTE: If you only modify the wireless password without modifying the name, then the terminal that has attached the wireless signal can not automatically connect to the signal, you must delete the wireless configuration file stored on the terminal, reconnect.

It is recommended to modify the wireless name and wireless password at the same time, if the signal name changed, the normal connection can be.

Iii. questions and Answers

You may be concerned about the following issues:

1 , can the signal name be set to Chinese?

A : to ensure that the wireless network can be used normally, do not set the wireless name to Chinese. Set to Chinese, because the encoding format is not uniform, some terminals may not be able to search for signals or search to garbled.

2 , do you need to reboot after changing the signal?

A : wireless signal name, password and the parameters of the changes immediately after the effective, do not need to reboot.

3 , dual-frequency router's 2.4G and 5G can I set the same wireless name?

A :the wireless name of 2.4G and 5G can be set to the same, but the terminal device can only search a wireless signal, can not distinguish whether this signal is 2.4G or 5G, the proposed two wireless name is set to different.