Example:The paper cannot be completely put into the tray.
Original cause:The size of the paper disk is incorrectly adjusted.
Solution:
Paper disk architecture diagram:
1. Open the front door, hold the paper length guide plate, and pull it out to expand the tray.
2. Before loading the paper, bend or slice the paper to separate the paper.
3. Place the printing area of the paper upwards.
Note:
1. Do not add too much paper to the paper disk.
2.
Make sure that the paper height does not exceed the paper capacity mark in the paper tray.
4. Pinch the paper length guide board to adjust the guide board so that it is closely aligned with the rear edge of the paper, and then hold the width of the guide board so that it is closely aligned with the side of the paper.
After the above operations are completed, your paper will be completely placed in the paper disk.
