Network Installation SLEs

1. Download tftpd32, HFS, ISO

2. Unzip the ISO to any local location, e.g. D:\iso\sles

3. Copy pxelinux.0, Linux, initrd to D:\pxe

4. Create a pxelinux.cfg directory in D:\PXE and create a new default file with the following contents:

Prompt 1

Default SLES10SP2

Timeout 100

Label SLES10SP2

Kernel Linux

Append INITRD=INITRD showopts

5. Execute Tftpd32.exe, set current directory to D:\pxe,server interface is local IP,

Point TFTP server and then click Settings,base Directory below to set the same as: D:\pxe

Then point to DHCP server configuration:

IP Pool starting address: One IP with network segment

Size of Pool:10

Boot file:pxelinux.0

Default Router: Native IP

mask:255.255.255.0

Do not close tftpd32

6. Run Hfs.exe, right-click in the empty space of the virtual File system, select Add folder from disk, point to D:\iso\sles, and select Real folder. Open Browser, enter HTTP//native Ip/sles, see the folder is successful

7. The installed server chooses PXE boot, after booting the kernel, select Install Mode from HTTP.

Network Installation SLEs