In order to centralize the management of project data, the request to build a file server, through a number of attempts to finally build, the installation process to share with you
Special Note: Try to install in English, because Chinese will error when installing
1. Select language after entering the interface: 中文版 then enter
2, enter the installation interface, Press F6, then press ESC, lower right corner to remove quiet, replace with all_generic_ide, enter
3. Choose a language: English return
4. Choose your location: other return
5. Select your region: Asia return
6. Choose your country: China return
7. Select the states carriage return
8, whether to configure the keyboard, select No on the line
9. Configure keyboard English (US) carriage return
10. Configure Host Name
11, configure the user name, here will repeat once
12, configure the user password, here is also repeated once
13, whether the home directory to encrypt, I choose No
14, Configuration time I choose Yes
15, because it is two hard disk to do RAID1, so I move the player partition
16. Select SCSI33 (SDA)
17, initialize the hard drive, select Yes
18. Create/boot partition
1. Create 1 new partitions
2. Allocation of storage
3. Select the partition and start the partition. I chose the primary partition
4. For the raid physical volume and set the boot flag to ON
18, create swap volume, home volume, root directory, operation and 171 samples, only the start of these three volumes are indicated as off
19, the following is the configuration of the two hard disk status, the second hard disk to be the same as the first hard disk configuration
20. Now start doing RAID1 and save the RAID volume partition
21. Create the first MD device, and create a total of 4 MD devices at a time
Check for two identical drives
Complete
After the raid is done, such as
Now it's time to go to the/boot, swap,/home, and root directories. Then install the system
After the mount is complete, such as
Start installing the system
Write hard Drive Select Yes
Installation in progress
Here HTTP can not be configured directly next
Here you need to choose to install those services, the default check is only standard system utilities, I installed only a few OpenSSH server,
We can choose according to the demand
Reboot required after installation is complete
After reboot to enter the login screen, the installation is completed here
Normal PC with two hard drives do RAID1 and install Ubuntu server 16.04