One-plus mobile phone x sim card installation method diagram

Yijia mobile phone X is positioned on its flagship product, including the basic and ceramic versions. Its mobile Unicom dual 4G + 2 gb ram + 16 gb rom version is priced at 1499 yuan, and the mobile Unicom dual 4G + 3 gb ram + 16 gb rom version is priced at 1599 yuan. The ceramic version is only 3 GB.

One plus mobile phone X adopts the dual 2.5D glass integrated body design, the card slot is located on the left side of the body, you need to use a Plus X box containing the card needle or other mobile phone card needle to take out the card slot, and then install the SIM card. Therefore, the first step to install SIM card on mobile phone X is to use the SIM card to remove the SIM card.

Steps for installing SIM card on one plus mobile phone X:

1. First open the packing box and take out the cards in it.

2. Because the SIM card slot is on the left side of the sub-body, the card slot will pop up when inserting it with a snap-in needle. Be sure not to use brute force. Use a little bit force to avoid damage to the card slot.

3. Then, add the Nano-SIM card. The dual nanoSIM card slot design is adopted for the one-plus mobile phone X. One card slot can be used as the microSD card slot.

* Mobile/Unicom version instructions

1. The SIM1/2 card slot supports the mobile China Unicom 4G network. You can switch the SIM1/2 business mode on the setting interface. If one card has the 4G traffic mode enabled, the other card slot only supports GSM.

2. The SIM2 card slot is compatible with the Nano-SIM card and MicroSD card, but the Nano-SIM card and MicroSD card cannot be placed at the same time. Either of them is preferred.

* Full Netcom version instructions

Case 1: Single Card

Any card slot identifies mobile, Unicom, and telecom cards.

Case 2: dual-card

1. No telecom card

That is, the dual-4G dual-card solution: any SIM card can have a 4G/3G network, and the other is a GSM network.

2. There is a telecom card

-If the carrier card is a 4G/3G network, the other card is a GSM network.
-If you select a 4G/3G network as the mobile or CCN card, the other carrier card is not in service status.
-If you select 4G network as the carrier card 1, the other carrier card 2 is unavailable.