We will give you a detailed analysis of the post-Paster shadow makeup tutorials for users of photoshop software.
Tutorial sharing:
SOURCE image:
Tutorial information
Software: Photoshop CS3 +
Completion Time: 30 minutes
Difficulty: Beginner
Step 1
Open the beauty model image material, use the cropping tool (shortcut: C), select the neck and above, and then confirm.
Step 2
First, we modify the lip color, and use the polygon loose plug-in (shortcut key L) to select the out lip,
On the layers panel, create an adjustment layer, and select the color phase/Saturation. The parameters are shown in the figure (color phase + 8 ).
Step 3
Create a new layer, use a soft angle brush, and set the color value to #7e2224 to smear the inner edges of the eyes, as shown in the following figure.
Modify the layer mode to overlay, transparency 100%:
Step 2
Create a new layer, use a soft angle brush, and set the color value to #5e8052 to smear the outer edge of the eye, as shown in the following figure.
Modify the layer mode to overlay, transparency 100%:
Step 2
In the same way as another layer, the color value is # dbdfa4. The layer mode is superimposed, and the transparency is 70%:
Step 2
Continue to smear the color value as #8d6d72. Layer attribute superposition, transparency 100%:
Step 2
Create a new layer, use a soft angle brush and the color is white, draw a curve, the layer mode is changed to soft light, transparency 100%:
Step 2
In the same position, use color #7e5822 to draw another small curve layer model and change it to overlay. The transparency is 100%:
Step 2
Use another color (#597540) to apply the outer margin of the left eye. The layer mode is changed to soft light and the transparency is 100%.
Step 2
Create a new layer and use the pen tool (P) to create a shape on the left eye eyelid. Press CTRL + ENTER to change the shape to the selected area and fill in the color #7e2224.
Change the layer mode to overlay, with a transparency of 50.
Step 2
Draw another shape color with #227e25 layer mode for superposition, transparency 100%:
Step 2
Copy the layers in steps 2 and 11 to a copy. Use the deformation function (Ctrl + T) to change its shape to the right eye angle.
Step 2
Open the gem necklace in the clip image, separate the gem and add it to the left eye, as shown in the figure
Step 2
Double-click the gem layer to bring up the layer properties panel and set the projection parameters, as shown in the figure.
Step 2
Copy the gem layer multiple times to arrange the gems and set different sizes and directions based on your own experience.
Step 2
Select all the gem layers and press CTRL + G to set the group mode to normal. The transparency is 100%. On the layer panel, use adjust layers to set the color and fullness,
Adjust the gem group (the downward impact of the adjustment layer is only for the GEM Group, as shown in the right figure below) so that it conforms to the face color.
(Another method that affects the modification is to press and hold the ALT key and click to adjust the position in the middle of the layer and the gemstone layer. If you do not know how to add a group for help, add 71835454 ).
Step 2
On the layers panel, use the adjustment layer curve to hide the GEM Group. Add a mask on this layer, and use a black soft angle brush to smear the selected area in the following figure to erase the desired bright area:
Done!
All right, the above information is all the content shared by the detailed tutorials for post-image repair of eye shadows makeup for the users of this software in photoshop, you can see that the software users here, Xiaobian believes that you are now very clear about the graph repair tutorial, then, let's follow the tutorial above to make a picture and see the effect.
