Photoshop gives the Highland mountain people pictures with brilliant rays

The difficult part of the tutorial is the processing of the sky. Footage of the sky and the peak color closer, using the channel to pull the map to retain the peak at the top of the local gray, so after the replacement of the sky will be a lot of natural.

Original

Final effect

1, open the original material large map, create an optional color adjustment layer, yellow, green, blue, white, black to adjust, parameter settings such as Figure 1-5, the effect is shown in Figure 6. This step adds orange to the picture, darkens the blue, and adds light cyan to the high light area.

< map 1>

< map 2>

< map 3>

< map 4>

< map 5>

< map 6>

2, press CTRL + J to copy the current optional color adjustment layer, the opacity to: 60%, the effect of the following figure.

< map 7>

3, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, then create the curve adjustment layer, the RGB, green, blue channel adjustment, parameters and effects as shown below. This step darkens the dark part slightly and increases the blue-purple color.

< map 8>

< map 9>

4, press CTRL + J to copy the current curve adjustment layer, press CTRL + ALT + G to create a clipping mask, the effect of the following figure.

< map 10>

5, create a color balance adjustment layer, shadow, midtones, high light adjustment, parameter settings such as Figure 11-13, after the layer to determine the opacity: 60%, the effect of Figure 14. This step mainly adds blue to the dark part of the picture, and the high light area increases the light yellow.

< map 11>

< map 12>

< map 13>

< map 14>

6, CTRL + ALT + 2 up the high light selection, and then create a curve adjustment layer, RGB, red, green, blue channel adjustment, parameters and effects as shown below. This step darkens the area of the picture's high light.

< map 15>

< map 16>

< map 17>

< map 18>

< map 19>

7, the background layer to copy a layer, press CTRL + Shift +] Top, the following figure.

< map 20>

8. Enter the channel panel, copy the blue channel and get the blue copy channel. Press CTRL + M to adjust the curve, turn the sky White, and darken the other areas. Make sure to use the soft side black brush to black out the sky, the middle peak can retain part of the gray, which is conducive to increasing the sky material when better fusion, the following figure.

< map 21>

Classification:

• PS Palette Tutorial