Photoshop uses black-field commands to create cool lighting effects

A little familiar with Photoshop software should be aware of the black field in the software, gray field, white field tools, they appear in the software in a number of performance, color levels, curves, exposure, do not underestimate them, they have extraordinary ability, such as color, pull map, etc. can be used by them. Now in the light of the exposure of the black field to produce beautiful lighting effect, of course, the black field in the color level can also achieve the same effect.

Effect:

Original:

First, open the image, copy the layer.

Second, first select the "Color Sampler" tool, in the image slightly deeper in the middle of the spot sampling, click, the following figure reference location and information Panel. (The information here is only for this picture, so that enthusiasts can get a better understanding of why.) The actual operation, you can save this step, directly with the black field straw in the image to take points, with the image to see the effect can be.

Third, enter menu bar-image-exposure degree, select the "sample in the image to set black field" straw, in the image sampling point 1 click, and then visible by our choice of RGB color values and the entire image below the sampling points are replaced All Black, which is the charm of the black field. As shown in figure:

Four, got very clean light feeling strong image, OK.

Five, observe the image effect, some part of a smear, small thorn on the stem is not complete, so we have to do again to reduce the range of black field of choice. Copy the original and hold down Ctrl+shift click the key to move to the top, close the layer 1 eyes.

Six, continue to select the "Color Sampler" tool, in the image selected slightly deeper than sampling 1 parts sampling, click, the following figure reference location and information Panel. (Here the information data only for this picture, the actual operation, can omit this step, direct use black field straw in the image to take points, with the image to see the effect can).

Seven, the menu bar---image---exposure, and then select "Sampling in the image to set the Black field" of the straw, sampling points in the image 2 Click, see the effect, obviously this black field narrowed down, most still retain the Huantuliang part of the traces, but carefully look at the details we want to not only keep and very clean, This is the result I want, very good. As shown in figure:

Eight, open layer 1 eyes, create a layer mask for the background copy and fill the mask with black, with a white brush, black background color, 125 stroke size, opacity and flow of 100%, and a scrub of the stems and the middle of the leaf, retaining details and light effects. Look at the Mask map:

Make stamped layer, close layer 1 and background copy eye, create mask for stamped layer, erase the middle part of bud with opacity and flow 60% black brush, keep detail and light sense effect.

Ten, again stamped layer. Observe the image, if there are dirty parts of the image with a black brush on the appropriate adjustment of image contrast. Complete!

Category:

• PS Image Processing