Powerful H3C MSR 30-16 routing interface (1)

The day before yesterday, we introduced an H3C MSR 30-16 router to the Zhongguancun online network equipment channel. This router is suitable for enterprise users, and the MSR 30-16 router adopts a modular structure, provides a variety of optional SICSmart Interface Card and Multi-funtional InterfaceModule Interface cards, and provides AC and POE power supply models. I think you may have a general understanding of MSR 30-16 hardware. Today, let's take a look at its WEB configuration interface information, which can provide a lot of convenience for network administrators.

This vro adopts a modular design, and the MSR 30-16 in this test also carries the OCE module instant communication). Therefore, in addition to the router's WEB configuration interface, there is also the OCE module's WEB configuration interface. Therefore, I will introduce two interfaces.

30-16 Router WEB configuration interface H3C MSR

Enterprise-level and consumer-level products vary greatly in terms of performance and usage. In the past, home-level router wireless routers were used) the WEB configuration interface of will have a fixed IP address at the factory time, But today this MSR 30-16 is not like this, we need to use the command line to configure the console port ).

Note: We have already debugged the address of Ethernet0/0 as 172.16.9.161 and the subnet mask as 225.225.0.0.

After the hardware facilities are connected, enter the IP address 172.16.9.161 In the IE address bar to enter the WEB interface window. Press the default user name and password and press enter to enter the Modulation Interface.

Vro configuration page

Basic configuration information

Interface Configuration Information WAN port)

You can see the previous settings for the WAN port, such as IP addresses and subnet masks.