PS Synthetic glass Glossy tomato filled with liquid

Effect Chart:

　

Original:

Open the tomato footage in Photoshop.

2, press Q into the quick mask, the entire layer with a black brush fill, get a pink mask effect, with a white brush to the left side of the tomato mask erase.

3. Exit the quick mask and get a selection.

4. Keep the selection, create a new layer, fill the selection with white in the new layer, perform the transform, set the width and length of the image to 96%/96%, clear the white area inside the selection, and get a white border.

5, fill set to 0, layer blending mode is superimposed.

6, for the white border layer to apply the layer style; Inner Glow (overlay), gradient overlay (overlay, linear), stroke (external, normal, fill mode: Gradient, linear)

7, for the outer stroke of the internal load selection, fill any color, fill to 0.

8. Apply the following layer styles: inner glow (multiply, Color #ffc200, method: Soft, contour: sawtooth), gradient overlay (multiply, radial).

9. Create a new layer and use the Oval selection tool to create an oval selection at the bottom of the tomato. Fill any color, padding to 0.

10. Apply the following layer styles to the layer: gradient overlay (multiply), gradient color to #7f6216 to #e7962b.

11. Use the Oval tool again to make a selection in the middle of the tomato, return to the tomato layer, copy the selection, paste it into the new layer, and put it on top of all the layers.

12, using black/transparent gradient overlay layer style, gradient blending mode is superimposed.

13, load the water material, and adjust to black and white, execution: image----Adjust----black and white, erase the middle and outer edge part.

14, layer blending mode for overlay, opacity 15%, add masks, make the diagram of the gradient effect.

15. Add an ellipse to the bottom of the tomato, change the selection shape with distorted deformation, and perform: Select----Transform selection, select----Transform---distort. Fills any color to the selection, padding to 0.

16, apply a gradient overlay to the layer to put the layer style. (color Dodge, gradient is: #f7882c----#f1cc64----#fdedbe.

17. Make a constituency in the lower half of the tomato filled with liquid.

18, layer fill is 0, apply gradient overlay layer mode (multiply).

19. Load the top area of the tomato into the selection, copy the selection, paste it into the new layer, and place it on the topmost layer. Execution: Image-adjust-black and white, the relevant parameters are set as follows:

20, to maintain the selection, execution: image-Adjust---levels, the relevant parameters are set as follows:

21, for this black and white layer, opacity 85%.

22, in order to maintain the transparency of the left side of the tomato, from the right side of the tomatoes make a small selection, copy and paste, the layer is placed under the black and white adjustment layer, layer blending mode is superimposed.

23, the tomato shape load selection, fill any color, fill to 0. Add a layer mask to the new layer, load the selection for the middle diagram position, use a black brush, opacity 30%, and smear the selection.

24. Add Gradient overlay layer style to layer (color Dodge, radial, fade from #ffe42e to Transparent).

25, return to the normal tomato layer, the whole tomato to make a selection, copy the selection, paste to the new layer, placed on top of all layers, turn it into black and white, using the color level tool, the parameters are set as follows:

26, to this step, the effect created is as follows:

27. Change the layer blending mode to filter color, erase the diagram position.

28, in order to create a tomato reflection color effect, the normal tomatoes on the top half of the paste to the new layer, layer blending mode for color, use the soft angle brush to erase the bottom and edge.

29, insert the black and white surface material.

30, the use of soft transparent eraser wipe off the edge of the surface material.

31, the use of superimposed layer blending mode.

32, choose green leaves, copy to the new layer, do the appropriate rotation, do a reflective effect. Put this layer underneath the reflective layer.

33, apply the gradient overlay layer style (normal, linear, gradually changing color to #ff460a to #fbf966).

34, to add a mask for the layer, do a black and white radial gradient, as shown in the following figure.

35, the tomato inside the outline of the selection, fill the selection of any color, filled to 0.

36, layer style for the inner shadow (color deepened, color #cf6800, contour set as shown in the following figure)

37, for the green leaf part of the loading constituency.

Classification:

• PS Composite Picture Tutorial