Step One, demand analysis of setting speed limit for tl-wr886n (V2-V3)
You can find the Ver (that is, the version/version) in the serial Number column on the label at the bottom of the tl-wr886n router, which is the hardware version. The following figure
View the hardware version of tl-wr886n
Please make sure that you limit which one, or the number of computers, mobile phone network speed? If the user's broadband is 4M size, you need to set the speed limit according to the requirements shown in the following figure.
TL-WR886N Requirements analysis before setting speed limit
Important Notes
In the figure above for demo data, everyone in the setting, please according to your own broadband size, access to the number of terminals, to reasonable distribution of broadband.
Allocation principle: Ensure that the minimum broadband sum does not exceed the total broadband.
Puling tl-wr886n (v2-v3) Set speed limit step two, specify the computer IP address
1, the desktop manually specify the IP address (this example is 192.168.1.10).
2, other computers, mobile phones and other terminals set to automatically obtain IP address.
Puling tl-wr886n (V2-V3) set the speed limit of the steps three, tl-wr886n set speed limit
1. Set Line Parameters
In the TL-WR886N Settings page, click "IP Bandwidth Control"--> "Broadband Line type" choice: ADSL line--> "Uplink total bandwidth" Fill:512--> "downlink total bandwidth" Fill in:4096--> click "Save". The following figure:
On the tl-wr886n, set up broadband line, uplink broadband, downlink broadband
Important Notes
(1), 1M Broadband line total bandwidth =1024kbps=128kbps;1m broadband uplink total bandwidth =128kbps=16kbps
(2), everyone please according to their own broadband size, and then according to the above relational type, the conversion completed.
2. Add Desktop Rules
Click "Add new Entry"--> at both the starting and ending addresses:192.168.1.10--> "uplink bandwidth Minimum Bandwidth": 300; " Maximum bandwidth "for:500--> set" downlink bandwidth Minimum "is: 1500;" Maximum bandwidth "For:3000--> settings complete click" Save ".
tl-wr886n set limits on desktop speed
3, set other terminal rules
Click "Add new Entry"--> at the starting and ending addresses: 192.168.1.100 and 192.168.1.199--> "Uplink bandwidth minimum Bandwidth": 200; " Maximum bandwidth "for:500--> set" downlink bandwidth Minimum "for: 2500," Maximum bandwidth "for the:3500--> settings complete click" Save. "
tl-wr886n set limits other devices on the Internet
4, open IP Broadband control
Check "Open IP Broadband Control"--> Click "Save", as shown in the following figure.
Opening speed limit on tl-wr886n
This IP bandwidth control setting is complete. The desktop can achieve downlink minimum 1500Kbps of bandwidth, other terminals share the minimum 2500Kbps total bandwidth, various terminals can achieve corresponding bandwidth requirements.