Puling tl-wr886n How to set up a wireless password

General tl-wr886n Set the wireless password step one, login to the Settings page

Enter tplogin.cn--> in the browser in the Jump page, enter: Administrator password, login to the TL-WR886N Settings page.

V1-v3 Version tl-wr886n login page

V4-V5 Version tl-wr886n login page

Pay attention to the problem

The Administrator password (login password) is the first time the tl-wr886n router is set up by the user. If you forget, just restore the tl-wr886n router to the factory settings, and then reset the tl-wr886n router to the Internet and reset the wireless password.

Puling tl-wr886n Set the wireless password step two, set the wireless password

1, v1-v3 version tl-wr886n wireless password settings

(1), Wireless name settings

Click "Wireless Settings"--> "Basic Settings"--> Modify "SSID"--> Click "Save"

V1-v3 version tl-wr886n wireless name settings

(2), Wireless password settings

Click "Wireless Settings"--> "Wireless security Settings"--> Select:wpa-psk/wpa2-psk--> Set "PSK password"--> Click "Save" below.

Wireless password settings for V1-V3 version tl-wr886n

Important Notes

"SSID", refers to the tl-wr886n router's wireless network name, recommended to use letters, numbers set, can not use Chinese characters.

"PSK password" refers to the tl-wr886n wireless network password, it is recommended to use uppercase + lowercase letter + number + symbol combination to set, and password length must not be less than 8 bits.

2, v4-v5 version tl-wr886n wireless password settings

Method 1, in the home page modification

After you log on to the Settings page, there will be "network status" on the upper left side of the page, where you can set up, modify the name of the tl-wr886n wireless network, and the wireless password

V4-V5 version tl-wr886n wireless password and name settings

Method 2, modifying in wireless settings

Click on "Routing Settings" as follows

Click "Routing Settings"

You can modify the name and wireless password of TL-WR886N's wireless network in the routing settings--> wireless settings, as shown in the following figure.

V4-V5 version tl-wr886n wireless password and name settings