QOS policy configuration for H3C-S5500EI Switches

H3C-S5500EI switch QOS policy configuration if there is a H3C-S550EI L3 switch in the enterprise and you want to make some restrictions, such as allowing those IP addresses
If you can access the Internet, you can use the QOS policy for configuration. H3C devices, unlike Cisco devices, only need
Configure the ACL and then apply it on the interface. It must use qos policies. Www.2cto.com
Procedure:
Define the class and match the rule: <Sysname> system-view [Sysname] traffic classifier class1 [Sysname-classifier-class1] if-match destination-mac acl 3001
Popular definition: <Sysname> system-view [Sysname] traffic behavior test [Sysname-behavior-dtest] filter deny
Create a QOS policy and bind the class to the popular <Sysname> system-view [Sysname] qos policy user1 [Sysname-qospolicy-user1] classifier class1 behavior test
Apply the QOS policy to the interface <Sysname> system-view [Sysname] interface GigabitEthernet 1/0/1 [Sysname-GigabitEthernet1/0/1] qos apply police user1 inbound (outbound) Source http://luciffer.blog.51cto.com/863671/550344