Radio/TV networks

The TV and television networks used by relatives and households are connected to cats and desktops. If you have bought a TP-Link wireless router, it always fails to be set up according to the instructions. It is reflected that the desktop and notebook can be connected to the router, but the router cannot access the Internet. In the past, ad was not so troublesome in university dormitories. After searching on the internet, I found that some of the areas with different radio/TV networks were set up. It is estimated that many people have encountered similar problems.

1. First, after cmd-ipconfig/all on the local machine is not connected to the vro, write down "DNS server" and "backup DNS server ".

2. When setting a vro, enter the addresses of the two DNS servers obtained in 1 in "Network Parameters"-"Wan Port Settings" and "manually set DNS servers.

3. In "Network Parameters"-"clone MAC address", click "clone MAC address ".

In addition, you need to select "Dynamic IP" in the "setting wizard.

The other steps remain unchanged so that you can access the Internet. If you are not familiar with the above points, you cannot solve them for a while. I hope this will help you.