Ramos System Win7+vhd+gurb Map

Reprinted (not verified) a time ago added a memory bar, the notebook memory upgrade to 6G, because the previous use of the 32-bit Win7 can not directly use 6G memory, casual 64-bit system. Find resources on the Internet when found that large memory can use Ramos, from memory virtual out of a hard disk, and then boot from the virtual hard disk, the system can run faster than most SSD hard disk.

After two days of tasting, N reboot finally successfully installed and launched the Win7 RAMOS, the following post tutorial.

Some of the preparatory work required before installation:

Lite WIN7 image 678mb:w7_678.gh Click to download http://www.anxz.com/down/7197.html

Grub4dos: Extract grldr.mbr grldr for boot boot. Click to download

Firadisk_driver:grub map out of the virtual hard drive. Click to download

Vsuite.ramdisk: For virtual memory hard drives (64-bit systems can be installed in Server Edition). Click to download

GHOST11: This is used to decompress the image, you can easily find a PE extract. Very easy to find, you can search for it.

EASYBCD: Modify the startup item to use the feature that was started from the VHD. Click to download

When you're ready, you can start the installation.

The first step is to build the VHD file.

Win+r run compmgmt.msc, switch to Disk Manager. Operations, create a VHD, establish a VHD-WIN7.VHD image.

Create VHD

Select the path and specify the size above the image needs to be almost 2.5 g (fixed size)

Select Path

Once set up, mount it on top of the system. Remember the drive letter, it is best to specify a volume label.

The second step is to overwrite the VHD disk with the Gho mirror.

Open GHOST11 Select Local–partition-from image to select your Gho image file.

Gho1

Then select the mirrored partition and make sure it's ready.

Select a mirrored partition

Next note, he wants you to choose the destination disk that needs to be restored, do not choose wrong. It's not wrong to choose according to size.

Select Destination Disk

Finally select the target partition, click OK to do it.

Destination partition

Then choose to overwrite the partition, you can make tea and so on, pay attention to do not restart after completion, we have something to do.

The third step is to write the startup item with EASYBCD.

Detach the VHD-WIN7.VHD image you just mounted.

Install EASYBCD, after booting, click that add-, select the VHD Startup tab, and then fill in the boot menu name to specify the VHD-WIN7.VHD image you just used.

To add a boot to a VHD system

Fourth, restart the system, enter the VHD system for system installation and software, driver installation.

1. After the system is installed, enter the system that starts from the VHD virtual hard disk, install the necessary graphics driver for your system, and Firadisk driver.

You can also install some necessary software for your system, such as Wps,qq,chrome.

Make sure your driver is installed.

2. Install Vsuite.ramdisk, run.

Click Miscellaneous, and use unrecognized memory on the tick.

Then select the memory virtual hard disk, select the size, specify the drive letter, tick the priority using unrecognized memory.

Create a memory hard disk

After determining the memory hard disk is generated.

3. Set your paging file to the memory hard disk just produced (because the system occupies a large amount of memory, resulting in free memory only about 700M, put the paging file on the memory hard disk, can solve the problem of insufficient memory), and delete all other paging files.

Right-click My Computer, properties, advanced system Settings-Toggle Advanced tab, Settings-Toggle Advanced tab, change to set your paging file to RAMDisk

Set up a paging file

Fifth step, install grub, write boot.

The administrator runs the command line under Run the following command (click Get bcdedit syntax profile)

bcdedit/create {FFFFFFFF-8D96-11DE-8E71-FFFFFFFFFFFF}/d "Grub4dos"/application Bootsectorbcdedit/set { FFFFFFFF-8D96-11DE-8E71-FFFFFFFFFFFF} device Partition=%systemdrive%bcdedit/set { FFFFFFFF-8D96-11DE-8E71-FFFFFFFFFFFF} path \grldr.mbrbcdedit/displayorder {FFFFFFFF-8D96-11DE-8E71-FFFFFFFFFFFF}/ AddLast

Then extract the grldr.mbr grldr file from grub to the boot directory (I'm C).

Create a Menu.lst file that is written in this way

Color Black/cyan yellow/cyantimeout=0default 0title vhd win7 hd0,1 in top ramfind--set-root/vhd-win7.vhdmap--mem--top ( hd0,1)/vhd-win7.vhd (hd0) map--hookroot (hd0,0) chainloader/bootmgr

The top command can also not add, if the image exceeds 3.25G must add the top instruction, the following path itself corresponds to the modification ((hd0,1) corresponds to the first hard disk of the second partition, I here D disk).

After reboot, starting from the Grub4dos menu, the system will read the image from the hard disk to the memory boot, experience the feeling of flying!

HDD Test

Precautions:

1. The Firadisk drive must be installed when the VHD starts up, otherwise the grub4dos will be started with a direct blue screen.

2. If Ramos goes in to prompt the page file configuration to fail, automatically specify a message for the paging file. You can advanced the VHD system, modify the paging file to the physical hard disk, restart, delete the new ramdisk with Vsuite.ramdisk, rebuild the RAMDisk, modify the paging file to RAMDisk, and then reboot directly to Grub4dos started in the Ramos can be.

3. If you want to install the software to modify the system settings, please go to the VHD system for modification, any changes made in the Ramos are not saved back.

4. There is no way to make a hot backup, using Winhex for hot backup failed, if you find a hot backup method, be sure to tell me Oh!

Ramos System Win7+vhd+gurb Map