Router Main interface cannot login how to troubleshoot settings

Users to help: Want to set up the router, but in the browser can not log the main interface of the router.

Share experience: There are a variety of reasons for the error, mainly or not familiar with the way to set up the router.

Correct login method:

To gather information about a router:

First, the router, in turn, collects the router's IP address, login username, password, and PIN code. Old routers are generally: 192.168.1.1, factory default login username and password are usually: admin. A PIN is a unique identification of a router.

and newer routers to avoid and front-end equipment (telecommunications equipment Set IP address, usually also 192.168.1.1) IP address conflict, and instead login URL, generally: tplogin.cn (Tp-link brand router).

Wired Network settings:

If you use a computer to set up a router, and is a wired network (to ensure that the computer's network card equipment intact, the driver installed correctly), the router will be connected to the power cord, and then use a network cable plug in the computer, and the other end of the router in the LAN port (four ports) At this point the router's power LED is often lit, and the corresponding LEDs on the LAN port will blink.

Then, open the Computer browser, enter the correct login IP address, confirm the correct words, you can pop-up login username, password settings box, and then enter ▶ to determine.

Just log on to the router's setup interface and walk through the wizard, and the router setup is done.

At this point, the broadband door network into the router's WAN port, it can be normal Internet.

Wireless network settings:

and wired network settings slightly different is that the wireless network set up the router, as long as the router's power is connected, the computer can receive the signal from the router.

The setting method in the computer, and the wired network setting method is similar, no longer repeat. Just first of all to ensure that the computer's wireless network card devices and wireless network card driver (if there is an exception, you can use the Wired direct network, updated wireless network card driver) are in the normal state, otherwise the settings may be wrong.

The wireless network is more than a wired network to open a service to the steps, such as not open, there will be errors:

Start → control Panel → admin tools → services → Locate and select the Wired AutoConfig service on the right (WIN7 also has the WLAN AutoConfig Service), then right-click and select the Top Start Service button.

Reason for error:

and front-end device IP address conflicts:

The first time you can log on to the router's settings interface, after closing the page, again open the router can not open the settings interface. This is because the optical fiber cat and other devices set the interface is also 192.168.1.1, as long as the input of this IP address, the Web site is open to the front-end device settings interface.

Change the LAN port on the router at this point. The steps are as follows:

Network parameter port ▶lan Port set ▶IP address ▶172.168.1.1▶ Save

Use the newly changed IP address again: 172.168.1.1 Enter the address bar of the bangs and press ENTER to open the interface.

To disable dial-up connections:

Start ▶ Control Panel ▶internet Option ▶ Connection ▶ never dial connection ▶ OK.

Fiber-optic household, no dialing.

To disable the network proxy:

Start ▶ Control Panel ▶internet option ▶ Connection ▶ LAN Settings ▶ Ensure that the proxy service is not selected ▶ determine

To close the offline working state of a browser:

Browser ▶ File ▶ Work Offline ▶ Ensure that offline work is not selected (not available in the high-version browser)

Browser failure:

Also, IE browser is the target, if there are problems will be wrong, you can switch to other different kernel browser, such as Firefox (Firefox), Google Browser (Chrome). If you use a dual-core browser, you may wish to switch to a non-ie browser kernel (icon on the right of the browser's address bar).

To reset the router:

Finally, there is a problem with the router's own settings cache, long press (5 seconds) the Reset (reset) button behind the router (some reset is a small hole, with a straightened paperclip) until all the LEDs flash together, indicating that the router reset was successful and all user-defined messages were cleared. Restore to factory defaults, reset the router.