Simulation life 2 face Production

Address: http://games.qq.com/a/20050128/000088.htm

 

I used the styling center to create a person who could be recognized. I collected some information and shared it to see if it was usable when I was creating a person.

 

Everyone should have heard of the word golden split. The ratio is '1: 100'. For example, there is a rectangle. The ratio of H to length is '1: 100 ', if the split is split from the long side into two points, one point is a square and the other is a rectangle, then the H length ratio of the new rectangle is still '1: 1.618 '.

 

(Cut the length of 1.618 from the length of 1, and a square with a length of 1 h and 1 will be obtained. Lucky enough? 1 H 0.618 rectangle, and 0.618: 1 is just equal to. 618)

 

This is a ratio discovered by bidaras, and many mathematicians believe that the proportions are the most beautiful, even a sect that worships numbers. If you are interested, you can search for information.

 

This prime proportion was later used in many architectural and painting arts (such as the pyramid, the holy temple of Butte, the Tower of Paris, and many other works created in the Renaissance ), even in terms of the beauty of the human body structure, it fits this number. I simply put it below. For. 618, if a simple proportion is used, it can be simplified to or a number later than or.

 

· Da Wenxi believes that the ratio of the upper half to the first half and the lower half to the foot is the most beautiful from the navel to. 168. However, you cannot adjust the height ratio in the shape center.

 

(Other opinions include integer doctors)

 

· Width of the nose and mouth =. 618.

 

· The ratio of the length of the nose beam to the height of the nose is. 618. (You know why the orients have a lot of integer types and want to put their noses up)

 

· From the front, the ratio of the mouth length to the corner of the mouth to the contour of the face is. 618.

 

· Face width and face length are 5 times and 8 times of the eye length, ratio =. (Similar to. 618)

 

· T Wenxi divides the face into three parts: the upper part from the hair margin to the eyebrow peak, the middle part from the eyebrow peak to the nose wing, and the lower part from the nose wing to the chin. The length of the three parts is equal, but in terms of length, the lower face> the middle face> the upper face (both slightly greater than) are nice-looking, but if the eyebrows are used for separation, the ratio of the forehead to the lower face of the facial features is about 1/3: 2/3, which is about 0.33: 0.66. It means that the length of the middle face and the lower face is similar. 618.

 

Simply put, the length and width of the following face are close to a rectangle (close to 5.3: 5.

 

· The eyes are 1/5 of the face width.

 

· The distance between two eyes is one eye.

 

· Equal width of the nose root and nose.

 

· From the nose and human perspective, women are about 105 to 108 degrees, and men are about 100 to 103 degrees.

 

· The straight line from the root of the nose to the chin is about 34 degrees greater than that of the vertical line. The male is about 36 degrees.

 

· Ratio of upper lip to lower lip thickness =. 5.

 

· The upper margin of the ear is the same as that of the brow peak, the ear is the same as that of the nose wing, the width of the ear is about 55% of the length, and the angle of the ear and the ear is parallel to that of the nose beam.

 

Well, I would like to provide it here first. You are welcome to add it to other moderators. Next, we look forward to seeing you have beautiful new works. XD

 

Note 1: in 2001, the discovery channel broadcasted a set of "face Mysteries", which were described by Dr. Steve marquard using the golden ratio and created a face model. When we put this model graph on the faces of stars in the East and West, we will find that most of the handsome men and girls we think fit in this model and there will be no human race difference. Among them, the most suitable male stars are Tom Cruise and ilisha Bai heli. : P